Serving Warrenville & nearby Winfield, Wheaton

Microwave Installation in Warrenville, IL

Over-the-range, drawer and built-in microwaves installed in Warrenville: anchored into the wall, bolted to the cabinet and vented the right way.

  • Installers working in Warrenville ZIP 60555, 60563
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Warrenville microwave installer will call you.

Microwave installs we take on in Warrenville

Lifting a microwave onto a wall plate is a two-person job, but the real work is around it: finding solid framing, drilling the cabinet to the template, routing the cord to an outlet above and lining up the duct. Our Warrenville installers handle all of it and haul the old unit away.

Not enough height above the range

Low cabinets above the stove are common in older layouts. We check the clearance against the installation guide and suggest a low-profile unit or a hood when it falls short.

Cabinet above that's the wrong width or depth

Microwaves are bolted up through the cabinet bottom, so that panel has to be sound and placed where the template says. We reinforce or rework it when it isn't.

Microwave above a pro-style or high-output range

Some makers don't allow an over-the-range microwave above high-output gas burners, and a microwave fan moves less air than a hood. We check the range's guide first.

Microwave drawer in an island or base cabinet

Drawer models need an exact opening, support underneath and a receptacle where the drawer won't hit it. We set all three before sliding the unit in.

Built-in microwave with a trim kit

Placing a microwave above a wall oven or in a tall pantry cabinet takes a precise cutout and an outlet inside. We prepare both and install the kit.

No outlet in the cabinet above

Makers usually call for a dedicated circuit and an outlet in the upper cabinet. Where the kitchen lacks it, the wiring is added first and the microwave goes up after.

Over-the-range microwave replacing a range hood

Trading a hood for a microwave means a new mounting plate, holes drilled through the cabinet bottom and a receptacle where the hood wire used to be. All three get done in one visit.

Duct that doesn't line up with the new unit

Rear-venting through the wall and top-venting through the cabinet need different paths. We line up the microwave's outlet with your duct and seal the joint.

What the install includes

  • Pre-install checkWe compare the model's guide with your cabinet width, cooktop clearance, outlet location and duct.
  • Old unit or hood removedWe unplug or disconnect the old unit and clear the wall and cabinet for the new one.
  • Outlet and circuitA receptacle in the cabinet above or behind the drawer, on a dedicated circuit when the maker calls for one, added by a licensed electrician.
  • Studs located and wall plate mountedThe mounting plate is leveled and screwed into studs per the template.
  • Unit hung and boltedThe unit is hooked on the bracket, bolted from above and checked for level.
  • Drawer and built-in cutoutsBase or wall cabinet openings sized to the maker's spec, with support and trim kits fitted.
  • Testing and haul-awayHeating, exhaust and light tested, old appliance and boxes removed.

What to pick before the install

Venting partsThe pieces that connect the microwave to the outside or set it up to recirculate.
Over-the-range microwavesThe most common type: a microwave and a vent fan in one unit over the cooktop.
Microwave drawersUnder-counter microwaves that open like a drawer, often in an island.
Built-in and trim-kit microwavesMicrowaves set into a wall or pantry cabinet with a finishing trim.
Low-profile over-the-range modelsShorter units that leave more room above the burners where cabinets are low.

Before and after: kitchens near Warrenville

Microwave Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Microwave Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Microwave Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Warrenville kitchen, 1980s two-story: microwave installation

The site: a 1980s two-story near Summerlakes. Before: white appliances. The main complaint was an old hood and a countertop microwave eating prep space. After: a new over-the-range microwave installed above the range and vented. Work included outlet and circuit, studs located and wall plate mounted, plus drawer and built-in cutouts.

Microwave Installation project in Naperville, beforeBefore
Microwave Installation project in Naperville, afterAfter

A Naperville 1990s two-story colonial: before and after

This one is a 1990s two-story colonial near Tamarack. Before: almond appliances. The reason for the call: an old range hood that barely moved any air. After: a new over-the-range microwave installed above the range and vented. The job covered old unit or hood removed, drawer and built-in cutouts, plus testing and haul-away.

Microwave Installation in Naperville →
Kitchen Remodeling project near Warrenville, beforeBefore
Kitchen Remodeling project near Warrenville, afterAfter

A Warrenville 1990s two-story colonial: before and after

What changed: cabinets in muted aubergine with matte black pulls, dark soapstone-look quartz counters, a terracotta-look square tile backsplash, hickory luxury vinyl plank flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Warrenville →
Kitchen Cabinet Painting project near Warrenville, beforeBefore
Kitchen Cabinet Painting project near Warrenville, afterAfter

Before and after: a two-story colonial from the 1990s in Warrenville

Finished: the same doors sprayed in white uppers and dusty blue lowers, new polished nickel pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Warrenville →

Install day

  1. Send the model and photosTell us which microwave you bought and show us where it goes.
  2. Fit and power checkClearances, power and duct are checked against the installation guide.
  3. Written estimateA clear written price with electrical or cabinet changes listed separately.
  4. Install and testOld unit down, new one mounted and vented, everything tested and the old microwave hauled off.

Microwave Installation questions from Warrenville homeowners

Can an over-the-range microwave vent outside?
Yes, if there's a duct through the wall or roof behind or above it. The blower is set to exhaust out, and a damper keeps outside air from coming back in.
How high should an over-the-range microwave be above the stove?
Each maker sets a minimum distance from the cooktop to the bottom of the microwave. We follow that number, which also depends on the cabinet height.
Is a microwave enough ventilation over a gas range?
A microwave fan helps, but it's not as strong as most hoods. We'll tell you honestly which fits your range.
What size over-the-range microwave fits my kitchen?
Most are made for a standard range opening, but height and depth vary. We measure the space under the cabinet and the cooktop clearance.
Does the wall plate have to go into studs?
Yes. Makers require the bracket to be fastened into framing because the microwave is heavy and hangs over heat.
Does Warrenville require a licensed electrician for microwave installation?
Kitchen permits require a copy of the electrician's license; owner-performed work is exempt. New circuits and wiring are done by licensed electricians.
Can Warrenville bulk pickup take my old appliance or cabinets?
Garbage hauler is Groot (630-892-9294). Bulk items over 50 lb: first item free, additional items 5 stickers each. If you'd rather not deal with it, we haul old units and debris away.
Warrenville building permit for microwave installation: where do I apply?
Permits go through Community Development Department, Building Division, phone 630-393-9050. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a Warrenville-registered contractor for microwave installation?
City requires every business operating in Warrenville to hold a business license ($75, calendar year). ask city to confirm. We take care of that before work starts.
Do I need a permit for microwave installation in Warrenville?
It depends on the scope. Warrenville's rule in short: A permit is required for remodeling or renovation of a kitchen. We handle the permit when one is needed with Community Development Department, Building Division.
Do you work in my part of Warrenville?
Yes. Our crews work across Warrenville, including Summerlakes, Fox Hollow, Warrenville Lakes, Timber Creek — ZIP 60555, 60563 — and nearby Winfield, Wheaton, Naperville.

Working in Warrenville

  • A lot of Warrenville kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Warrenville homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development Department, Building Division handles kitchen permits and pull them for you.

SummerlakesFox HollowWarrenville LakesTimber CreekSaddle RidgeThornwilde

ZIP 60555ZIP 60563

Microwave Installation nearby

Planning a kitchen project in Warrenville?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback