Mold on cabinet backs and particleboard
We remove mold-affected particleboard and match new panels to the cabinet where we can.
Serving Oak Brook & nearby Villa Park, Lombard
Kitchen Mold Remediation in Oak Brook, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Oak Brook kitchens.
- Serving Oak Brook ZIP 60523
- Containment so the damage doesn't spread
- One team from cleanup to rebuild
Kitchen mold problems we take care of in Oak Brook
Spraying bleach on mold under a sink rarely solves it, because the source is still wet and the growth is often inside the particleboard or drywall. Our Oak Brook crew stops the moisture, sets up containment with HEPA air filtration and takes out what can't be cleaned.
Mold behind or under the dishwasher
A leaking door seal or drain hose can keep the floor and wall behind the dishwasher damp for months. We pull the unit and check the subfloor, side panels and drywall.
Mold inside a wall after a leak
Hidden wall mold is handled by removing the drywall and insulation that grew it and cleaning the studs.
Mold under the kitchen sink
Black or green spots on the cabinet floor or back panel under the sink mean moisture has been there a while. We fix the leak, remove the damaged panel and clean the cavity behind it.
Mold found during a remodel
Tear-out sometimes reveals old leak damage with growth. That gets remediated, not covered up by new drywall.
Condensation and window mold
Mold on the sill or wall under a kitchen window often comes from condensation. We clean or replace the affected parts and look at how the room is vented.
Mold under the sink with no visible leak
Sometimes the leak is intermittent, like a dishwasher drain that drips only during a cycle, or condensation on a cold pipe. We test the connections and meter the wood to find it.
Musty smell with no mold in sight
A persistent earthy smell in the kitchen often means growth inside a cabinet, wall or under the floor. We inspect and use moisture readings to narrow it down.
What we handle after the damage
- ContainmentWe isolate the affected area so spores and dust stay inside it.
- HEPA air filtrationWe filter the air in the work area with HEPA equipment while materials are removed.
- Removing affected porous materialsMaterials mold has grown into are removed rather than cleaned.
- Cleaning what staysFraming, plywood and other solid surfaces are HEPA-vacuumed and cleaned.
- DryingWe confirm the materials are dry so growth doesn't restart.
- Final cleaningA detailed cleanup of the work area finishes the remediation.
- RebuildNew cabinet panels, drywall, insulation and finishes go back in.
Tools of the job
Moisture metersTools to find wet materials and confirm they are dry before closing up.
Mold-resistant materialsOptions that hold up better in a spot that has seen water.
Replacement panels and drywallMaterials to rebuild the area after remediation.
HEPA vacuumsCleanup equipment that holds fine dust instead of blowing it around.
Containment sheetingPlastic barriers, zip doors and tape that isolate the work area.
Kitchen Mold Remediation before and after — Oak Brook homes
Problem
Fixed
DetailKitchen Mold Remediation in a 1990s two-story colonial, Oak Brook
The site: a 1990s two-story colonial in Oak Brook. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: a swollen, spotted cabinet floor under the sink. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included containment, removing affected porous materials, plus final cleaning.
Before
AfterLombard kitchen, 1990s two-story colonial: kitchen mold remediation
The site: a 1990s two-story colonial in Lombard. The kitchen as it was: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The reason for the call: mold under the kitchen sink. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered containment, removing affected porous materials, plus cleaning what stays.
Kitchen Mold Remediation in Lombard →
Before
AfterA Downers Grove 1980s two-story: before and after
This one is a 1980s two-story near Shady Lane Estates. The kitchen as it was: solid-surface integrated sink and golden-oak cabinets with oak soffits above. What bothered the owners most: a musty smell that wouldn't go away. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered HEPA air filtration, drying, plus final cleaning.
Kitchen Mold Remediation in Downers Grove →
Before
AfterKitchen Remodeling in a 1970s split-level, Oak Brook
Finished: cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Oak Brook →
Before
AfterOak Brook kitchen, 1970s tract home: kitchen cabinet painting
Finished: the same doors sprayed in sage green, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Oak Brook →How restoration goes
- InspectA visit to assess the growth, the moisture and the plan.
- Fix the moistureThe leak or condensation is repaired before removal begins.
- Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
- Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.
Kitchen Mold Remediation questions from Oak Brook homeowners
Will bleach kill mold under my sink?
It may make it look better for a while. Without fixing the moisture and removing porous material, it usually returns.
What's the difference between mold removal and mold remediation?
The terms are often used the same way, but remediation covers the cause and the contained removal, not just the visible spots.
Can mold be removed without replacing my cabinets?
Plywood and solid wood can often be cleaned; particleboard with growth is replaced. Whole cabinets rarely need to go.
Can we stay home while you work?
Usually yes, with the work area sealed off. If anyone in the household prefers to be away during removal, we can schedule around that.
What affects the cost of mold remediation?
Area, access, materials removed and rebuilding are the main factors. We price it after we've seen it.
What is the Oak Brook building department phone number?
Permits go through Development Services (Building), phone (630) 368-5101. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in Oak Brook?
It depends on the scope. Oak Brook's rule in short: Village publishes a Residential Permit Requirement Listing; its Residential Alteration category requires contract/scope of work, architectural plans and plat of survey. We handle the permit when one is needed with Development Services (Building).
Do you work in my part of Oak Brook?
Yes. Our crews work across Oak Brook — ZIP 60523 — and nearby Villa Park, Lombard, Elmhurst.
Working in Oak Brook
- A lot of Oak Brook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Oak Brook homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Development Services (Building) handles kitchen permits and pull them for you.
ZIP 60523
Kitchen Mold Remediation nearby
Other kitchen services in Oak Brook
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.