Oven running too hot or burning food
Burned bottoms and dark edges when the settings haven't changed often mean the temperature sensor or the control is at fault.
Serving Naperville & nearby Lisle, Warrenville
Oven, Stove & Cooktop Repair in Naperville, IL
Oven not heating, burner won't light or the temperature is off? We repair gas and electric ranges, wall ovens and cooktops in Naperville.
- Technicians covering Naperville ZIP 60540, 60563, 60564, 60565
- Diagnosis first, then a written price for the repair
- Honest advice when replacing makes more sense
Oven, stove and cooktop problems we fix in Naperville
We repair freestanding and slide-in ranges, wall ovens and cooktops in Naperville homes, gas and electric. The visit starts with a diagnosis, because a cold oven can be a burned-out element, a weak igniter, a bad sensor or a control board, and each is a different fix.
Electric burner or element not working
When one burner stays cold while the others work, the fault is in that burner's element, switch or wiring. We trace it.
Uneven baking
When baking comes out lopsided, we look at airflow, heating and the seal, then fix the part that's off.
Display blank or error code
Error codes point to a system, not always a single part. We check the sensor, the wiring and the control the code refers to.
Gas oven not heating, but the stovetop works
Gas ovens use a hot-surface igniter that weakens with age. If it glows and nothing happens, it's not drawing enough current to open the valve; replacing it is a common fix.
Gas smell near the stove
If you smell gas, don't turn anything on or off. Leave the house and call the gas utility or 911 from outside. Once the utility has made it safe, we diagnose and repair the range.
Oven not heating after self-clean
Cleaning cycles stress the wiring and parts. When the oven dies after one, we test the fuse, sensor and control.
Burner clicking nonstop
Endless clicking usually traces to the switch behind a knob, often after a spill. A replacement switch stops it.
Where we look first
- Safety and power checkBreaker, gas shutoff and a quick safety check come first.
- Temperature testWe measure what the oven actually reaches.
- Sensor and control testsWe check what tells the oven when to heat and when to stop.
- Burner and switch checksSurface burners, caps, igniters, switches and spark modules checked.
- Written quoteCause explained and parts and labor quoted in writing before work starts.
- Repair by qualified techniciansFailed parts replaced; gas valve and igniter work done by qualified technicians.
- Test and leak checkWe heat it, test it and confirm the gas side is tight.
Common fixes and parts
Gas and electric rangesThe everyday range in most kitchens, whichever fuel it uses.
Wall ovensBuilt-in ovens in a wall cabinet.
Controls and sensorsParts that read and regulate the heat.
Door and lock partsParts that seal and lock the oven door.
Heating partsBake and broil elements, oven igniters and surface elements.
Oven, Stove & Cooktop Repair before and after — Naperville homes
Problem
Fixed
DetailA Naperville 1980s two-story: before and after
The site: a 1980s two-story in Naperville. The kitchen as it was: white appliances. What bothered the owners most: an oven that ran hot and burned dinner. After: the oven with a new bake element installed, heating evenly with the oven light on. On site this meant sensor and control tests, written quote, plus test and leak check.
Before
AfterOven, Stove & Cooktop Repair in a 1980s two-story, Lisle
This one is a 1980s two-story near Oakview. The kitchen as it was: almond appliances. What bothered the owners most: an oven that no longer held its temperature. After: the oven with a new bake element installed, heating evenly with the oven light on. Work included temperature test, sensor and control tests, plus repair by qualified technicians.
Oven, Stove & Cooktop Repair in Lisle →
Before
AfterBefore and after: a two-story colonial from the 1990s in Warrenville
This one is a two-story colonial from the 1990s near Thornwilde. Before: black appliances. What bothered the owners most: an oven that ran hot and burned dinner. The result: the oven with a new bake element installed, heating evenly with the oven light on. Work included sensor and control tests, burner and switch checks, plus repair by qualified technicians.
Oven, Stove & Cooktop Repair in Warrenville →
Before
AfterNaperville kitchen, 1990s two-story colonial: kitchen remodeling
What changed: cabinets in light butter yellow with satin brass pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Naperville →
Before
AfterNaperville kitchen, 1990s two-story colonial: kitchen cabinet painting
Finished: the same doors sprayed in pale mint green, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Naperville →From diagnosis to fixed
- Tell us the symptomCall or use the form with the problem and the model number.
- Diagnosis visitWe come out and pin down the failed part.
- Written quoteA clear quote before work, and whether the range is worth fixing.
- Repair and testThe part goes in, the oven heats to temperature and every burner lights.
Oven, Stove & Cooktop Repair questions from Naperville homeowners
Who do I call about a gas smell in Naperville?
The local gas utility or 911 handle gas leaks, not appliance repair companies. Call them first, then us.
Why is my oven not heating?
On electric ovens it's usually a burned-out bake element; on gas ovens a weak igniter. A sensor, a fuse or the control board can also be the cause.
Why does my gas oven igniter glow but the oven won't light?
The igniter has weakened. It still glows, but doesn't draw enough current to open the gas valve. Replacing it usually fixes the problem.
Why won't my stove burner light?
Usually the cap is off-center, the burner ports are clogged or the igniter is wet. If it clicks but won't catch after drying and cleaning, the igniter or spark module needs replacing.
Is it worth repairing an oven?
Usually, yes. Elements, igniters, sensors and switches are common and reasonable repairs. A failed control board on an older budget range is where replacement starts to make sense.
Do I need a permit for oven and stove repair in Naperville?
It depends on the scope. Naperville's rule in short: Remodeling such as kitchens requires a permit, as do electrical work (minor repairs and low-voltage excepted), plumbing pipe/fixture installation or rearrangement, and structural changes. We handle the permit when one is needed with Transportation, Engineering and Development (TED) Business Group, Building Permits.
Do you work in my part of Naperville?
Yes. Our crews work across Naperville, including Downtown Naperville, Highlands, Tamarack — ZIP 60540, 60563, 60564, 60565 — and nearby Lisle, Warrenville, Bolingbrook.
Working in Naperville
- A lot of Naperville kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Naperville homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Naperville Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Downtown NapervilleHighlandsTamarack
ZIP 60540ZIP 60563ZIP 60564ZIP 60565
Oven, Stove & Cooktop Repair nearby
Other kitchen services in Naperville
Refrigerator & Ice Maker RepairNot cooling, frost, leaks and dead ice makers diagnosed and fixed.
Dishwasher RepairDraining, cleaning, leaking and door problems found and fixed.
Microwave RepairOver-the-range and built-in microwaves diagnosed and repaired safely.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.