Venting rules in a Lisle condo
Before we plan a duct in a condo unit, we look at the building's rules and what the existing vent connects to.
Serving Lisle & nearby Downers Grove, Woodridge
Range Hood Installation in Lisle, IL
We install under-cabinet, wall chimney, island and insert range hoods in Lisle, ducted outside wherever the house allows.
- Installers working in Lisle ZIP 60532
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range hood installs we handle in Lisle
Most kitchen ventilation complaints come from the install, not the hood: a duct that is too small, a long run full of elbows, or a fan that blows grease into the cabinet above. Our Lisle installers set the hood, the duct and the exterior cap as one system.
1980s hood on an old duct
A 1980s hood swap usually turns up a small, greasy duct and a damper that no longer closes. Those get replaced with the hood.
Long duct run with many elbows
Run length and turns matter as much as fan size. We map the route before choosing the hood and keep the path short and smooth.
Custom hood cover that needs an insert
Wood or plaster hood covers need a liner or insert inside them. We install the insert, the duct and the wiring so the cover can be finished around it.
Gas range that needs stronger ventilation
Cooking on gas puts more into the kitchen air than electric or induction does. A ducted hood with enough capture area and airflow is the right match.
Duct too small for the new hood
The maker's instructions list the duct size the hood needs. If the existing duct is undersized, we enlarge the run rather than reduce at the hood.
Swapping an over-the-range microwave for a hood
Many owners trade the microwave above the range for a proper hood. The cabinet above may need trimming and the duct usually needs upgrading.
Hood that vents into the attic or soffit
Venting into a soffit or attic space only moves the problem out of sight. The exhaust has to terminate outside the building envelope.
What the install includes
- Site check and sizingCooktop width, fuel type and duct path are checked before a model is chosen.
- Permit and approvalsPermits, condo approvals and any makeup-air requirement are confirmed up front.
- Removing the old hoodWe take out the old unit and check what is behind it before the new one goes up.
- Blocking and mountingSolid wood blocking added in the wall or ceiling so the hood is anchored to framing.
- Duct runA short, direct duct with as few elbows as possible.
- Electrical connectionPower brought to the hood and connected per the maker's instructions.
- Recirculating setupWhere ducting outside isn't possible, a recirculating kit with charcoal filters is installed.
Options to choose from
Wall chimney hoodsA canopy on the wall with a chimney cover hiding the duct up to the ceiling.
Island hoodsCeiling-hung hoods for cooktops in an island, usually wider than the cooking surface.
Inserts and linersFan units built into a custom wood, plaster or metal hood cover.
Internal and remote blowersMost hoods carry the fan inside; some use an inline or exterior blower to cut noise in the kitchen.
Ducted vs recirculatingDucted hoods send air outside; recirculating hoods filter it through charcoal and return it to the room.
Before and after: kitchens near Lisle
Before
Installed
DetailRange Hood Installation in a suburban townhome, Lisle
This one is a suburban townhome near Four Lakes Village. The kitchen as it was: white appliances and oak flat-panel cabinets. What bothered the owners most: a recirculating hood that left the kitchen smoky. After: a new stainless chimney range hood ducted to the outside. Work included site check and sizing, duct run, plus electrical connection.
Before
AfterBefore and after: a 1990s two-story colonial in Downers Grove
The site: a 1990s two-story colonial near Shady Lane Estates. The kitchen as it was: white appliances and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: an old hood that was loud and pulled very little air. The result: a new stainless chimney range hood ducted to the outside. The job covered blocking and mounting, duct run, plus recirculating setup.
Range Hood Installation in Downers Grove →
Before
AfterA Wheaton 1990s two-story colonial: before and after
This one is a 1990s two-story colonial near Downtown Wheaton. Before: black appliances and golden-oak cabinets with oak soffits above. What bothered the owners most: a recirculating hood that left the kitchen smoky. The result: a new stainless chimney range hood ducted to the outside. Work included removing the old hood, blocking and mounting, plus electrical connection.
Range Hood Installation in Wheaton →
Before
AfterBefore and after: a 1990s two-story colonial in Lisle
Cabinets in light butter yellow with satin brass pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Lisle →
Before
AfterBefore and after: a 1990s two-story colonial in Lisle
What changed: the same doors sprayed in pale mint green, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Lisle →From the old unit to the new one
- Photos and modelSend photos of the range wall, the old hood and the cabinet above, plus the model you like.
- Duct route and sizingWe decide where the duct can run and which hood fits that route.
- Written estimateA clear written price with duct and electrical work listed separately.
- Install and testWe install, test the airflow and clean up the same day in most cases.
Range Hood Installation questions from Lisle homeowners
Do I need an electrician to install a range hood?
Not when a suitable power supply is already there; we connect the hood to it. A new circuit or switch is run by an electrician.
Can a range hood vent into the attic?
No. Kitchen exhaust has to go all the way outside through a wall cap or roof jack, never into an attic, soffit or joist space.
Can I install a range hood myself?
Swapping a like-for-like under-cabinet hood is a manageable DIY for some people. New ducts, roof or wall penetrations and new wiring are where a pro saves trouble.
Ducted or ductless: which should I choose?
Ducted hoods remove the air; recirculating ones clean and return it. We go ductless only when the building rules it out.
Do I need makeup air for a big hood in Lisle?
It depends on the fan size and the local code. We look it up for your address and plan for it when it applies.
Can you do range hood installation in a Lisle condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
What is the Lisle building department phone number?
Permits go through Development Services Department, phone 630-271-4150. When your scope needs one, we prepare the application and schedule the inspections.
Does Lisle require a licensed electrician for range hood installation?
Electrical permits require a letter of intent and license copy from the electrical contractor; owner-occupants of a primary residence may do the work themselves with an electrical affidavit. New circuits and wiring are done by licensed electricians.
Do you work in my part of Lisle?
Yes. Our crews work across Lisle, including Oakview, The Meadows, Four Lakes Village — ZIP 60532 — and nearby Downers Grove, Woodridge, Wheaton.
Working in Lisle
- A lot of Lisle kitchens date from the 1980s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
OakviewThe MeadowsFour Lakes Village
ZIP 60532
Range Hood Installation nearby
Other kitchen services in Lisle
Range Hood RepairFans, motors, switches, lights and rattles on kitchen range hoods.
Oven, Range & Cooktop InstallationGas and electric ranges, wall ovens and cooktops, safely connected.
Kitchen Electrical WorkNew circuits and outlets for kitchen appliances.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.