Serving Addison & nearby Wood Dale, Itasca

Microwave Installation in Addison, IL

Over-the-range, drawer and built-in microwaves installed in Addison: anchored into the wall, bolted to the cabinet and vented the right way.

  • Serving Addison ZIP 60101
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Addison microwave installer will call you.

Microwave installs we take on in Addison

Lifting a microwave onto a wall plate is a two-person job, but the real work is around it: finding solid framing, drilling the cabinet to the template, routing the cord to an outlet above and lining up the duct. Our Addison installers handle all of it and haul the old unit away.

No outlet in the cabinet above

Over-the-range models plug into a receptacle inside the cabinet overhead. If yours has none, a licensed electrician adds one, often on its own circuit as the maker asks.

Built-in microwave with a trim kit

Placing a microwave above a wall oven or in a tall pantry cabinet takes a precise cutout and an outlet inside. We prepare both and install the kit.

Moving the microwave off the counter

A countertop microwave eats prep space. Mounting one over the range, under the counter or inside a cabinet gives that space back.

Not enough height above the range

Low cabinets above the stove are common in older layouts. We check the clearance against the installation guide and suggest a low-profile unit or a hood when it falls short.

Convection or air-fry microwave on an old circuit

Bigger multi-mode microwaves may trip a breaker that also feeds the toaster and coffee maker. A dedicated circuit fixes that.

Microwave drawer in an island or base cabinet

Putting a microwave drawer in the island keeps it within reach for kids and away from the cooktop. We build the cutout to the maker's spec and run power to it.

Cabinet above that's the wrong width or depth

Some cabinets over the range are too deep or have a recessed bottom. We shim or modify them so the top bolts pull the unit snug and level.

Microwave that sags, wobbles or pulls away from the wall

Gaps behind a microwave or a door that drops when opened usually mean the original install missed the studs. We take it down and fasten it properly.

What the install includes

  • Pre-install checkMeasurements, power and venting are checked against the installation instructions.
  • Old unit or hood removedThe old microwave or range hood is taken down, its wiring made safe and the bracket removed.
  • Studs located and wall plate mountedWe find the framing and fasten the bracket to solid wood.
  • Cabinet drilled to the templateThe upper cabinet is marked and drilled so the bolts and cord line up.
  • Blower set and duct connectedThe fan is set for outside venting through the wall or roof, or for recirculation with a filter.
  • Unit hung and boltedTwo installers lift the microwave onto the plate and draw it tight to the cabinet with the top bolts.
  • Drawer and built-in cutoutsBase or wall cabinet openings sized to the maker's spec, with support and trim kits fitted.

Models, parts and fittings

Venting partsDamper, duct transitions, charcoal filters and wall or roof caps.
Convection and air-fry combosMicrowaves that also bake, crisp or air-fry, available in over-the-range and built-in styles.
Built-in and trim-kit microwavesUnits framed into cabinetry so they look part of the kitchen.
Over-the-range microwavesMicrowaves with a built-in exhaust fan and light that mount above the range.
Low-profile over-the-range modelsSlimmer microwaves for kitchens with limited space over the range.

Microwave Installation before and after — Addison homes

Microwave Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Microwave Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Microwave Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a two-story colonial from the 1990s in Addison

The site: a two-story colonial from the 1990s in Addison. Before: white appliances. The main complaint was a weak hood and a microwave stuck on the counter. The result: a new over-the-range microwave installed above the range and vented. Work included old unit or hood removed, blower set and duct connected, plus unit hung and bolted.

Microwave Installation project in Wood Dale, beforeBefore
Microwave Installation project in Wood Dale, afterAfter

A Wood Dale two-story colonial from the 1990s: before and after

A two-story colonial from the 1990s in Wood Dale, a typical kitchen for Wood Dale. What we started with: black appliances. What bothered the owners most: an over-the-range unit that sagged off its bracket. Finished kitchen: a new over-the-range microwave installed above the range and vented. Work included studs located and wall plate mounted, blower set and duct connected, plus drawer and built-in cutouts.

Microwave Installation in Wood Dale →
Microwave Installation project in Villa Park, beforeBefore
Microwave Installation project in Villa Park, afterAfter

Microwave Installation in a two-story colonial from the 1990s, Villa Park

A two-story colonial from the 1990s in Villa Park, a typical kitchen for Villa Park. Before: almond appliances. The main complaint was an old range hood that barely moved any air. After: a new over-the-range microwave installed above the range and vented. Work included old unit or hood removed, studs located and wall plate mounted, plus cabinet drilled to the template.

Microwave Installation in Villa Park →
Kitchen Remodeling project near Addison, beforeBefore
Kitchen Remodeling project near Addison, afterAfter

Addison kitchen, postwar bi-level: kitchen remodeling

Cabinets in dark teal with brushed nickel bar pulls, charcoal concrete-look quartz counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Addison →
Kitchen Cabinet Painting project near Addison, beforeBefore
Kitchen Cabinet Painting project near Addison, afterAfter

Kitchen Cabinet Painting in a postwar bi-level, Addison

Finished: the same doors sprayed in deep navy, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Addison →

From the old unit to the new one

  1. Send the model and photosTell us which microwave you bought and show us where it goes.
  2. Fit and power checkClearances, power and duct are checked against the installation guide.
  3. Written estimateAn itemized estimate covering removal, mounting, venting and any outlet or cabinet work.
  4. Install and testWe hang it, connect it, run it and take the old one away.

Microwave Installation questions from Addison homeowners

Can you put a microwave drawer in my island?
We can. We check the island's cabinet layout and wiring path first.
Does the wall plate have to go into studs?
Yes. Makers require the bracket to be fastened into framing because the microwave is heavy and hangs over heat.
Can you install a microwave I bought at a big-box store or online?
We do. Send the model number and we bring the mounting and vent parts it needs.
Can an over-the-range microwave vent outside?
Most models can vent outdoors through the top or back. Whether yours can depends on the duct path, which we check.
Do I need an electrician to install an over-the-range microwave?
Only when the power isn't ready. We check for the outlet and circuit before install day and arrange the wiring if needed.
Addison contractor registration: do kitchen contractors need it?
Addison does not require contractor registration, but trade licenses and a Letter of Intent must be submitted with each permit application. We take care of that before work starts.
Addison building permit for microwave installation: where do I apply?
Permits go through Community Development Department (Building & Zoning), phone (630) 693-7530. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for microwave installation in Addison?
It depends on the scope. Addison's rule in short: Addison's Building Division states building permits are required by code for all work; most applications are reviewed within 10 business days through the online portal. We handle the permit when one is needed with Community Development Department (Building & Zoning).
Do you work in my part of Addison?
Yes. Our crews work across Addison — ZIP 60101 — and nearby Wood Dale, Itasca, Villa Park.

Working in Addison

  • A lot of Addison kitchens date from the 1960s. We know these layouts well and what is worth keeping.
  • Most Addison homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development Department (Building & Zoning) handles kitchen permits and pull them for you.

ZIP 60101

Microwave Installation nearby

Planning a kitchen project in Addison?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback