Serving Glenview & nearby Northbrook, Park Ridge

Post-Renovation Cleaning in Glenview, IL

Construction dust, residue and debris cleared out of your new Glenview kitchen so you can actually use it.

  • Serving Glenview ZIP 60025, 60026, 60062
  • A clear checklist of what gets cleaned
  • Scheduled around your day

Prefer a callback?

Leave your number and a Glenview post-construction cleaner will call you.

After-remodel cleanup problems we handle in Glenview

When the contractor packs up, the new kitchen is still coated in fine drywall and sawdust, with stickers on the appliances and grout haze on the tile. We clean Glenview kitchens after renovation with HEPA vacuums and damp wiping, inside every cabinet and drawer and up to the vents.

Older home: possible lead in the dust

If walls with old paint were cut or sanded in a pre-1978 house, the dust may contain lead. Lead-safe cleanup and verification are the renovator's job under EPA rules; our cleaning uses HEPA vacuums and wet wiping, never dry sweeping.

Grout haze on new tile

Grout haze is normal after tiling, but it needs to be cleaned off. We use products that are safe for the tile type, especially natural stone.

Inside new appliances

New appliances still need a cleaning before first use. We wipe out the interiors, racks and gaskets.

Paint specks and caulk smears

Small paint drips on the floor, counters or glass are lifted with the right tool for each surface, without scratching.

Debris and dust on windows

Windows near a remodel get dusty glass, gritty tracks and paint specks. We clean the glass, sills and tracks.

Scratch-prone new surfaces

Construction dust is abrasive. We lift it off instead of rubbing it in, so new finishes keep their shine.

Fine drywall dust on every surface

Sanding joint compound leaves a powder that coats counters, cabinet tops and the floor and comes back after one wipe. We vacuum it with HEPA filtration first, then damp-wipe.

Stickers and labels on new appliances

Peeling the film off stainless leaves a sticky residue. We take it off carefully and clean the surface along the grain.

Our cleaning checklist

  • Walk-through after the trades finishA walk-through once the contractor is done tells us what needs special care.
  • Debris pickupLeftover scraps, packaging and small debris are bagged and removed from the kitchen.
  • HEPA vacuuming top to bottomWe vacuum from the top of the room down with HEPA machines to capture fine dust.
  • Inside cabinets and drawersWe clean the inside of all cabinets and drawers so they are ready for dishes.
  • Vents, returns and fixturesWe clean the vent covers and returns and dust every fixture.
  • Labels, adhesive and filmStickers, protective film and tape residue come off appliances, glass and fixtures.
  • Damp wiping all surfacesCounters, cabinet fronts, trim, doors and walls are wiped with damp microfiber after vacuuming.

Products and methods

Grout haze removersWe choose the haze remover by tile type, with stone-safe options for marble and limestone.
HEPA vacuumsVacuums with HEPA filters are the main tool for construction dust.
Plastic razor blades and non-scratch padsPlastic scrapers and soft pads remove stuck-on spots safely.
Adhesive removers safe for finishesUsed to take off stickers and tape residue without dulling paint, stainless or plastic.
pH-neutral cleaners for stone and new finishesMild, neutral cleaners that won't harm fresh sealers or finishes.

Kitchens like yours in Glenview: before and after

Post-Renovation Cleaning in a 1980s-1990s two-story colonial / tract house — beforeBefore
Post-Renovation Cleaning in a 1980s-1990s two-story colonial / tract house — afterAfter

Post-Renovation Cleaning in a 1980s two-story, Glenview

A 1980s two-story near The Glen, a typical kitchen for Glenview. The main complaint was drywall dust on every surface after the remodel. After: the same new kitchen dust-free and ready to use: cabinets clean inside and out, counters and appliances free of labels and residue, floor cleaned. Work included debris pickup, inside cabinets and drawers, plus labels, adhesive and film.

Post-Renovation Cleaning project in Northbrook, beforeBefore
Post-Renovation Cleaning project in Northbrook, afterAfter

Northbrook kitchen, two-story colonial from the 1990s: post-renovation cleaning

This one is a two-story colonial from the 1990s near Downtown Northbrook. The main complaint was construction dust in the cabinets and drawers. After: the same new kitchen dust-free and ready to use: cabinets clean inside and out, counters and appliances free of labels and residue, floor cleaned. On site this meant walk-through after the trades finish, debris pickup, plus damp wiping all surfaces.

Post-Renovation Cleaning in Northbrook →
Post-Renovation Cleaning project in Park Ridge, beforeBefore
Post-Renovation Cleaning project in Park Ridge, afterAfter

Before and after: a 1990s two-story colonial in Park Ridge

The site: a 1990s two-story colonial in Park Ridge. The main complaint was a new kitchen too dusty to use. After: the same new kitchen dust-free and ready to use: cabinets clean inside and out, counters and appliances free of labels and residue, floor cleaned. The job covered inside cabinets and drawers, labels, adhesive and film, plus damp wiping all surfaces.

Post-Renovation Cleaning in Park Ridge →
Kitchen Remodeling project near Glenview, beforeBefore
Kitchen Remodeling project near Glenview, afterAfter

A Glenview postwar bi-level: before and after

What changed: cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Glenview →
Kitchen Cabinet Painting project near Glenview, beforeBefore
Kitchen Cabinet Painting project near Glenview, afterAfter

Glenview kitchen, postwar Cape Cod: kitchen cabinet painting

What changed: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Glenview →

From walk-through to done

  1. Schedule after the trades finishWe come in after the final punch list, so the clean stays clean.
  2. Walk-through and estimateWe look at the space and finishes and give you a written estimate.
  3. Detailed cleaningThe crew works top to bottom, inside and out, usually in one visit.
  4. Final checkWe review the kitchen with you and touch up anything missed.

Post-Renovation Cleaning questions from Glenview homeowners

How long does the cleaning take?
Most kitchens take a day or less. Heavy dust or several rooms add time.
When should the cleaning be scheduled?
Once the contractor is done and the floor protection is up. If any work remains, it's best to wait.
Why does dust keep coming back?
Sweeping and dry dusting throw it back into the air. Capturing it with HEPA vacuums and damp cloths ends that.
How much does post-renovation cleaning cost?
It depends on the size of the area, how much dust and residue there is and whether interiors and windows are included. We give a written, itemized estimate after seeing it.
Do you clean the HVAC vents?
We clean the register covers, return grilles and the openings we can reach. Full duct cleaning is a separate service.
Do I need a permit for post-renovation cleaning in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.

Working in Glenview

  • A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
  • Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.

The ParkThe GlenThe Grove

ZIP 60025ZIP 60026ZIP 60062

Post-Renovation Cleaning nearby

Planning a kitchen project in Glenview?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback