Damaged lid, baffles or rusted trap
A trap that leaks or has lost its baffles isn't separating grease anymore. Replacement with a poly or coated unit is often the fix.
Serving Elmhurst & nearby Villa Park, Lombard
Grease Trap Installation & Cleaning in Elmhurst, IL
Grease traps and interceptors sized, installed, cleaned and kept on schedule for restaurants and food-service kitchens in Elmhurst.
- Serving restaurants and kitchens in Elmhurst ZIP 60126
- Work scheduled around service hours
- Paperwork ready for inspectors
Grease trap problems we handle in Elmhurst
Every kitchen that washes greasy pans sends fats, oils and grease toward the sewer, and the trap or interceptor is what stops them. In Elmhurst we size and install grease traps, clean and maintain them on a schedule, and keep the service records the sanitary district or village asks to see.
Not sure how often to clean
Busy fryer kitchens may need small traps cleaned every few weeks; larger interceptors go longer. We set the schedule from your actual buildup.
School, church or daycare kitchen trap
Community and school kitchens are often missed until a backup. A regular visit with records keeps them off the problem list.
Sewer or rotten-egg smell in the kitchen
A sour smell near the sinks or the back door often comes from a trap that is overdue for cleaning or has a bad lid seal. We clean it and check the seal and venting.
Moving into a space with an unknown trap
Previous tenants don't always leave records. We find the trap, check its size and condition and start a fresh log.
New restaurant needs a trap or interceptor
Before a new kitchen opens, the plumbing plan has to show grease treatment. We size, permit and install the trap or interceptor that fits the menu.
Trap too small for the kitchen
An undersized trap needs constant cleaning and still lets grease through. Replacing it with a correctly sized unit usually costs less trouble over time.
Grease clogs in the sewer line
Grease that escapes the trap cools and hardens in the pipe. We jet the line clean and fix the trap problem that let it through.
What the job covers
- Site visit and trap locationWe find the trap or interceptor, open it and look at size, condition and connections.
- SizingWe calculate the size from your sinks, flow and menu, not a guess.
- Permits and plan reviewPlumbing permit and plan review for new or replaced traps, where the village requires it.
- Cleaning and pump-outSmall traps cleaned on site; larger interceptors pumped by licensed waste haulers.
- Inspection of baffles and outletWe look inside the empty trap for damage that lets grease pass.
- Line jettingJetting for lines that have built up grease past the trap.
- Recurring scheduleA standing cleaning interval matched to your trap and cooking volume.
What goes into the system
Gasketed lids and access risersLids and risers that make the trap easy to open and keep smell out of the kitchen.
Under-sink grease trapsCompact hydromechanical traps that sit under or next to a sink and are cleaned often.
Poly and coated steel trapsPolyethylene traps don't rust; coated steel is common in older installs.
Under-sink trap or interceptorIndoor traps suit lighter grease loads; interceptors suit busy kitchens and many fixtures.
Flow control fittingsFlow restrictors that keep water moving through the trap slowly enough for grease to separate.
Kitchens like yours in Elmhurst: before and after
Before
AfterGrease Trap Installation & Cleaning in a bakery kitchen, Elmhurst
This one is a bakery kitchen in Elmhurst. The main complaint was a grease trap that kept backing up the prep sinks. The result: the same interceptor pumped and the lid closed, service hose coiled on the truck. Work included permits and plan review, inspection of baffles and outlet, plus recurring schedule.
Before
AfterA Lombard commercial kitchen: before and after
The site: a commercial kitchen in Lombard. The reason for the call: a full interceptor and a sour smell by the back door. Finished kitchen: the same interceptor pumped and the lid closed, service hose coiled on the truck. Work included site visit and trap location, inspection of baffles and outlet, plus line jetting.
Grease Trap Installation & Cleaning in Lombard →
Before
AfterElmhurst kitchen, restaurant kitchen: commercial hood cleaning
Finished: the same hood degreased to bare stainless with an inspection sticker area.
Commercial Hood Cleaning in Elmhurst →
Before
AfterKitchen Remodeling in a 1950s ranch, Elmhurst
What changed: cabinets in light butter yellow with satin brass pulls, creamy quartzite-look quartz counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Elmhurst →
Before
AfterElmhurst kitchen, postwar Cape Cod: kitchen cabinet painting
What changed: the same doors sprayed in creamy white uppers and navy lowers, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Elmhurst →How the project goes
- Call or book a visitTell us about the kitchen, the backup or notice and when the trap was last cleaned.
- Inspect the trapA look inside the trap and at the lines around it.
- Written estimateYou get an itemized estimate for cleaning, repair or a new trap.
- Clean, pump or installThe trap is cleaned or pumped, repaired or replaced, often before or after service hours.
- Log and scheduleRecords for your files and a cleaning interval that fits your kitchen.
Grease Trap Installation & Cleaning questions from Elmhurst businesses
Can I clean my grease trap myself?
Small under-sink traps can be cleaned by trained staff, as long as grease is disposed of properly and a log is kept. Large interceptors are pumped by licensed waste haulers.
How does a grease trap work?
It gives greasy water time to cool and separate, holding the grease and solids back while water moves on.
What's the difference between a grease trap and a grease interceptor?
Size and location. Traps sit under or near sinks and are cleaned by hand; interceptors are buried tanks pumped by truck.
What can't go down a grease trap?
Fryer oil and large amounts of grease belong in a rendering container, not the drain. Harsh chemicals and enzymes that just move grease downstream cause problems too.
Can a plumber clean a grease trap?
Plumbers handle installation, repairs and line jetting; hauling grease away from interceptors is licensed waste hauler work. We coordinate both.
What is the Elmhurst building department phone number?
Permits go through Community Development Department (Building), phone 630-530-3030. When your scope needs one, we prepare the application and schedule the inspections.
Do you work in my part of Elmhurst?
Yes. Our crews work across Elmhurst — ZIP 60126 — and nearby Villa Park, Lombard, Addison.
Working in Elmhurst
- Kitchens in Elmhurst keep cooking as long as possible: we schedule the noisy work for off-hours.
- Permits, plan review and inspections go through Community Development Department (Building) and the fire department when the job needs them.
- Certificates of insurance, keys, roof access and landlord sign-off are arranged ahead of the first visit.
ZIP 60126
Grease Trap Installation & Cleaning nearby
Other kitchen services in Elmhurst
Commercial Kitchen Hood InstallationType I and II hoods, grease duct, fans and makeup air, built to NFPA 96.
Commercial Hood CleaningHood, duct and roof fan degreased to bare metal, after hours.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.