Visible LED dots and glare under the cabinets
Glare and dotted reflections come from bare strips placed too far back. A covered channel near the front edge spreads the light evenly.
Serving Batavia & nearby Geneva, St. Charles
Kitchen Lighting Installation in Batavia, IL
Recessed, pendant and under-cabinet lighting for Batavia kitchens, laid out so the counters are bright and wired by a licensed electrician.
- Crews working in Batavia ZIP 60510, 60539
- Most jobs done in days, with your kitchen still usable
- Samples and a written quote before we start
Kitchen lighting problems we solve in Batavia
A single fixture in the center of the ceiling leaves you working in your own shadow. Our Batavia electricians replace it with lights placed over the counters, the sink and the island, using LED fixtures that suit your ceiling and wiring.
Switches in the wrong place or one switch for everything
When every light is on one switch, you can't set a softer evening light. We split the layers onto separate switches and dimmers.
Light that looks too blue or too yellow
Mixing bulbs of different color temperatures makes a kitchen look patchy. We use one consistent warm white across the fixtures.
Recessed lights under an insulated attic
Non-IC cans need clearance from insulation. We install fixtures rated for contact so the attic stays fully insulated.
One old fixture lighting the whole kitchen
A single dome or flush fixture can't light a whole kitchen evenly. We replace it with a layout of recessed or surface LEDs across the ceiling.
Under-cabinet lighting: hardwired or plug-in?
For a clean look, we hardwire under-cabinet lights with a concealed driver and a switch or dimmer. Plug-in and battery options suit renters or quick fixes.
Adding recessed lights to an existing ceiling
Recessed lighting can go into most existing ceilings without tearing them down. We check joist direction and obstacles before placing them.
Canned or canless recessed lights?
We compare both for your ceiling: wafers for tight spaces and quick installs, cans with LED trims where the depth allows it.
What's included
- Lighting layoutA plan for ceiling, task, island and accent light, with fixture positions and switching.
- Wiring and circuit checkExisting circuits checked for capacity; a permit pulled when new circuits are added.
- Wire fished to fixtures and switchesWe pull wire from the switch to each fixture location.
- Fixtures installedEach fixture hung, leveled and wired.
- Switches and dimmersControls installed where you enter and use the kitchen.
- Testing and adjustmentWe run each circuit and fine-tune before leaving.
- Patching and cleanupWe close up openings and clean the work area.
Finishes we offer
Dimmers and controlsLED-rated dimmers, smart switches and motion or timer controls.
Surface and flush fixturesCeiling-mounted lights when recessing isn't possible.
Accent lightingSofter layers that add depth in the evening.
Color temperature optionsWarm white around 2700 to 3000K, and selectable-color fixtures where you're unsure.
Under-cabinet LEDHardwired strips, puck lights or light bars mounted under the wall cabinets.
Kitchen Lighting Installation before and after — Batavia homes
Before
AfterA Batavia two-story colonial from the 1990s: before and after
This one is a two-story colonial from the 1990s in Batavia. What we started with: a fluorescent box light in the ceiling. What bothered the owners most: an old fluorescent box that flickered. Finished kitchen: recessed lights and under-cabinet LED strips on separate switches. Work included lighting layout, wiring and circuit check, plus fixtures installed.
Before
AfterBefore and after: a 1990s two-story colonial in Geneva
The site: a 1990s two-story colonial near Mill Creek. The kitchen as it was: a brass chandelier over the nook. The main complaint was one ceiling fixture lighting the whole room. Finished kitchen: two glass pendants and recessed lights on separate switches. Work included lighting layout, testing and adjustment, plus patching and cleanup.
Kitchen Lighting Installation in Geneva →
Before
AfterA Batavia two-story colonial from the 1990s: before and after
Finished: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in Batavia →
Before
AfterA Batavia 1980s two-story: before and after
Finished: the same doors sprayed in forest green, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Batavia →
Before
AfterBatavia kitchen, 1990s two-story colonial: cabinet refacing
New flat slab doors with a thin edge in white uppers and deep green lowers on the existing boxes, matching face-frame veneer and satin brass pulls.
Cabinet Refacing in Batavia →How your kitchen lighting project goes
- Share photos and plansTell us what feels too dark and what lights you have in mind.
- Layout visitAn electrician looks at the space and plans the layers and switching.
- Written estimateAn itemized estimate listing fixtures, wiring, switches, patching and any permit.
- Install and testFixtures wired and mounted, dimmers set, ceiling patched and everything tested.
Kitchen Lighting Installation questions from Batavia homeowners
Do I need a permit for kitchen lighting?
It depends on the scope. New wiring and circuits typically require a permit, which we pull.
How far from the cabinets should recessed lights be?
Lights too close to the uppers wash the doors; too far back leave you in shadow. We place them over the front of the counter.
Do I need an electrician to install kitchen lighting?
Anything beyond a bulb swap is best left to a licensed electrician. We also check whether the work needs a village permit.
How much does kitchen lighting installation cost?
Fixture count, wiring access, patching and controls drive the price. We put it in writing before we start.
Hardwired or plug-in under-cabinet lights?
We recommend hardwired in a remodel or when you want a finished look. Plug-in suits renters.
Does kitchen lighting project need a Batavia building permit, and who files it?
Permits go through City of Batavia Community & Economic Development - Building Division, phone 630-454-2700. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen lighting project in Batavia?
It depends on the scope. Batavia's rule in short: Building permits are required for all construction; a Residential Alteration handout is available. We handle the permit when one is needed with City of Batavia Community & Economic Development - Building Division.
Do you work in my part of Batavia?
Yes. Our crews work across Batavia — ZIP 60510, 60539 — and nearby Geneva, St. Charles, West Chicago.
Working in Batavia
- A lot of Batavia kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Batavia homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Downtown Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
ZIP 60510ZIP 60539
Kitchen Lighting Installation nearby
Other kitchen services in Batavia
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.