Serving Roselle & nearby Bloomingdale, Hanover Park

Kitchen Cabinet Modification in Roselle, IL

We cut, resize and rebuild the cabinets you already have in Roselle so a new fridge, range or dishwasher fits and the kitchen works better.

  • Installers working in Roselle ZIP 60172
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Roselle cabinet carpenter will call you.

Cabinet changes Roselle owners ask us for

You do not need new cabinets to get a bigger refrigerator or more drawers. We rework the boxes you already own: openings widened or raised, doors turned into drawers, panels and fillers added, all matched to the finish in your Roselle kitchen.

1970s openings sized for old appliances

Kitchens from that era often have a fridge nook and range gap that are too small now. Targeted cabinet work fixes the fit.

Adding a dishwasher to an older kitchen

Some older kitchens never had a dishwasher. We remove a base cabinet next to the sink, frame a standard opening and finish the sides for the new unit.

Base cabinets with doors instead of drawers

Pulling pots from the back of a low shelf gets old. Turning a door cabinet into a drawer base puts everything within reach.

Wasted space at fillers and corners

Corners and fillers hide usable inches. We look at whether a slim pull-out, a tray divider or a reworked corner cabinet fits.

Flat doors that look plain

Simple slab doors can take applied trim to create a Shaker-style frame. We cut, glue and fill the molding, then the doors are painted to match.

Fridge opening too narrow

Width usually comes from the fillers and panels beside the fridge. We find where the space can be taken and rebuild a clean finished edge.

Switching to a wider range

Upgrading to a bigger range is mostly carpentry: narrowing a neighboring base cabinet, reframing the opening and arranging the counter work.

No place for the microwave

We can build a microwave shelf into a tall pantry, a base cabinet or the space above the range, depending on your model and wiring.

What we hook up and check

  • Measuring the appliance and openingBefore any cut, we compare the manufacturer's cutout dimensions with what the cabinets really measure.
  • Protecting the counters and floorWe lay protection on the floor and tape off counters and adjacent doors.
  • Raising or shortening uppersWe reset wall cabinets at the new height and fasten them securely into studs.
  • Panels, fillers and trimNew end panels, fillers, scribe and toe-kick are fitted where the cabinets were changed.
  • Drawers and shelvesWe fit the new drawers or shelves and adjust them to run smoothly.
  • Matching the finishNew parts are painted or stained to match the existing cabinets as closely as the old finish allows.
  • Appliance fit check and cleanupThe new unit is test-fitted, doors are adjusted and the dust leaves with us.

Models, parts and fittings

Matching face frame stockWe use the same wood species as your frames when we rebuild an edge.
Microwave and spice pull-out insertsShelf kits, pull-out spice racks and tray dividers that fit modified openings.
Finished end and refrigerator panelsFlat, Shaker or raised panels sized for fridge surrounds, cabinet ends and island sides.
Paint and stain for new partsWe finish new pieces with the same type of coating the cabinets have, tinted to match.
Drawer boxes and slidesPlywood or dovetail drawer boxes on full-extension, soft-close slides.

Before and after: kitchens near Roselle

Kitchen Cabinet Modification in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Cabinet Modification in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Cabinet Modification in a 1980s-1990s two-story colonial / tract house — detailDetail

Kitchen Cabinet Modification in a 1990s two-story colonial, Roselle

This one is a 1990s two-story colonial in Roselle. The kitchen as it was: honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs and almond appliances. What bothered the owners most: an appliance upgrade the old cabinets could not take. After: the opening widened and the upper cabinet raised, a panel added, a new refrigerator fitting flush. Work included measuring the appliance and opening, protecting the counters and floor, plus drawers and shelves.

Kitchen Cabinet Modification project in Bloomingdale, beforeBefore
Kitchen Cabinet Modification project in Bloomingdale, afterAfter

Bloomingdale kitchen, 1980s two-story: kitchen cabinet modification

The site: a 1980s two-story in Bloomingdale. The kitchen as it was: white thermofoil cabinets peeling at the edges, oak trim and white appliances. What bothered the owners most: an appliance upgrade the old cabinets could not take. After: the opening widened and the upper cabinet raised, a panel added, a new refrigerator fitting flush. Work included protecting the counters and floor, panels, fillers and trim, plus drawers and shelves.

Kitchen Cabinet Modification in Bloomingdale →
Kitchen Cabinet Modification project in Hanover Park, beforeBefore
Kitchen Cabinet Modification project in Hanover Park, afterAfter

Before and after: a two-story colonial from the 1990s in Hanover Park

This one is a two-story colonial from the 1990s near Ontarioville. What we started with: golden-oak cabinets with oak soffits above and black appliances. What bothered the owners most: cabinets built around appliances that no longer exist. After: the opening widened and the upper cabinet raised, a panel added, a new refrigerator fitting flush. On site this meant raising or shortening uppers, drawers and shelves, plus matching the finish.

Kitchen Cabinet Modification in Hanover Park →
Accessible Kitchen Remodeling project near Roselle, beforeBefore
Accessible Kitchen Remodeling project near Roselle, afterAfter

Accessible Kitchen Remodeling in a 1970s tract home, Roselle

What changed: a lowered bright white quartz counter section with knee space under the sink, cabinets in cream uppers and walnut-stained lowers with matte black pulls, pull-down shelves in the uppers, drawers instead of base doors, a side-opening wall oven, a lever faucet and recessed lights and under-cabinet LED strips.

Accessible Kitchen Remodeling in Roselle →
Kitchen Remodeling project near Roselle, beforeBefore
Kitchen Remodeling project near Roselle, afterAfter

Roselle kitchen, 1970s split-level: kitchen remodeling

What changed: cabinets in light greige with brushed nickel bar pulls, light marble-look quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Roselle →

From the old unit to the new one

  1. Visit and measureAt the visit we measure the openings and check how the cabinets are built.
  2. Plan and estimateWe explain the approach, any limits on finish matching and the price in writing.
  3. Parts preparedAnything custom is built ahead so the on-site time stays short.
  4. On-site workMost modifications are finished on site in one or two working days.
  5. Fit checkWe check clearances and door swings with you before we leave.

Kitchen Cabinet Modification questions from Roselle homeowners

Can you add a microwave shelf to my cabinets?
Usually. The microwave model, its ventilation needs and the nearest outlet decide where the shelf can go.
Can you modify cabinets for a dishwasher?
Yes, including openings for panel-ready models. We coordinate with the plumber and electrician for the connections.
Can my cabinets be cut for a bigger fridge?
In many kitchens it can be done. We check the new fridge's height, width and clearance needs against your opening first.
Should I modify or replace my cabinets?
If most of the kitchen works, modifying a few cabinets is the sensible step. We will tell you if replacement makes more sense.
Can cabinet doors be changed to drawers?
Usually. Converting door bases to drawers is one of the most useful changes we make.
Do I need a Roselle-registered contractor for cabinet modification?
Contractors must register with the Village via Cloudpermit and be licensed: surety bond, certificate of insurance naming the Village, $75 fee. We take care of that before work starts.
Do I need a permit for cabinet modification in Roselle?
It depends on the scope. Roselle's rule in short: Permit required for projects including bathroom and kitchen remodeling, electrical and plumbing work; also water heater, roof, HVAC. We handle the permit when one is needed with Development & Engineering Services (Building & Zoning).
Do you work in my part of Roselle?
Yes. Our crews work across Roselle — ZIP 60172 — and nearby Bloomingdale, Hanover Park, Schaumburg.

Working in Roselle

  • A lot of Roselle kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Roselle homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Development & Engineering Services (Building & Zoning) handles kitchen permits and pull them for you.

ZIP 60172

Kitchen Cabinet Modification nearby

Planning a kitchen project in Roselle?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback