Tile that ends in the wrong place
Thin slivers of tile at the corners and edges come from no layout. We plan the pattern so cuts are even and hidden where possible.
Serving Plainfield & nearby Bolingbrook, Naperville
Kitchen Backsplash Installation in Plainfield, IL
Tile backsplashes set straight, grouted clean and finished around every outlet in Plainfield kitchens.
- Crews working in Plainfield ZIP 60544, 60585, 60586, 60543
- Most jobs done in days, with your kitchen still usable
- Samples and a written quote before we start
Backsplash problems we solve in Plainfield
Most of the work in a good backsplash happens before the first tile goes up. Our Plainfield tile setters flatten the wall, extend the outlet boxes and lay out the pattern, then set and grout subway, mosaic, stone or porcelain tile.
Awkward edges and ends
We decide early where the tile ends and how — to the cabinet, to the ceiling or to a trim line — so the edges look intentional.
Outlets sunk behind the tile
Sunken switches and cover plates that don't sit flat look sloppy. Box extenders bring them out to the face of the tile.
Dated or cracked tile
Old tile in a color you don't like, with cracked pieces and stained grout, is removed and the wall repaired before new tile goes up.
Grout stained or cracking
Grout that soaks up stains can be avoided: epoxy or a stain-resistant grout behind the range and sink stays cleaner.
Bare wall behind the counters
Paint behind a stove never stays clean for long. A tiled backsplash takes the grease and the water and still looks good.
Peel-and-stick that didn't last
Peel-and-stick tiles lift near the stove and bubble behind the sink. We remove them, clean the adhesive off the wall and install real tile.
Uneven wall surface
Wavy walls make tile edges catch the light unevenly. We skim or patch the wall flat before setting, especially for large-format tile.
What the work covers
- Layout and tile selectionWe pick the pattern and the starting point with you before ordering material.
- Wall repair and prepThe wall is repaired, leveled out and primed so the tile bonds.
- Outlet box extendersExtender rings so outlets and switches sit flush with the tile face.
- GroutingSanded, unsanded or epoxy grout chosen for the tile and joint width.
- Edges and trimBullnose, pencil liner or a metal profile where the tile ends.
- Caulk at the counterFlexible caulk where tile meets the counter and the cabinets.
- Sealing and cleanupNatural stone and cement-based grout sealed when needed; the kitchen cleaned.
Materials and finishes
Slab backsplashOne continuous piece behind the range or along the whole wall.
Mosaic and glassMosaics add texture; glass tile reflects light and shows thin-set through if set poorly.
Handmade-look and zelligeIrregular tile with depth and shine, set with care for its varying thickness.
Subway tileClassic 3x6 or longer rectangles in a running bond, stacked or herringbone layout.
Ceramic and porcelain tileThe everyday choice: durable, easy to clean and available in every size, from subway to large panels.
Kitchens like yours in Plainfield: before and after
Before
In progress
After
DetailKitchen Backsplash Installation in a 2000s open-plan home, Plainfield
This one is a 2000s open-plan home in Plainfield. Before: tumbled travertine tile and speckled brown granite with full-bullnose edges. What bothered the owners most: a dated tile pattern they were tired of. Finished kitchen: a white herringbone tile backsplash with clean edges and outlets set flush. Work included layout and tile selection, wall repair and prep, plus edges and trim.
Before
AfterBefore and after: a 1980s two-story in Bolingbrook
A 1980s two-story near Heritage Creek, a typical kitchen for Bolingbrook. What we started with: almond laminate with a backsplash lip. What bothered the owners most: the old laminate lip and bare wall above it. After: a terracotta-look square tile backsplash with clean edges and outlets set flush. On site this meant outlet box extenders, caulk at the counter, plus sealing and cleanup.
Kitchen Backsplash Installation in Bolingbrook →
Before
AfterNaperville kitchen, two-story colonial from the 1990s: kitchen backsplash installation
This one is a two-story colonial from the 1990s near Tamarack. Before: white ceramic tile with dark stained grout lines. The reason for the call: a backsplash that looked its age. After: a gray beveled subway tile backsplash with clean edges and outlets set flush. On site this meant layout and tile selection, outlet box extenders, plus grouting.
Kitchen Backsplash Installation in Naperville →
Before
AfterPlainfield kitchen, 2000s two-story with an open kitchen: countertop fabrication & installation
Finished: charcoal concrete-look quartz countertops with a tight seam, an undermount sink and a new faucet.
Countertop Fabrication & Installation in Plainfield →
Before
AfterA Plainfield newer open-plan house: before and after
Finished: hickory luxury vinyl plank flooring through the kitchen with clean transitions.
Kitchen Flooring Installation in Plainfield →How your backsplash installation goes
- Pick tile and patternBring samples or ideas; we help you choose tile, grout color and layout.
- Measure and planA site visit to check the wall and lay out the pattern on paper.
- Prep and setWall repaired, outlets extended and tile set — often in a day or two for a typical kitchen.
- Grout and finishJoints filled, edges trimmed, counter line caulked and the room cleaned.
Kitchen Backsplash Installation questions from Plainfield homeowners
Do I need to seal my backsplash?
Only some materials: marble, travertine and other stone, plus cement grout if you want it more stain resistant.
How high should the backsplash go?
Usually up to the bottom of the upper cabinets; on open walls and behind the hood many people run it to the ceiling.
Can you tile over my existing backsplash?
Sometimes, if the old tile is solid and flat and the added thickness works with the outlets and the trim. Often removing it gives a better result.
Do I need to remove the 4-inch splash?
Not always. Tile can start above it, but removing it gives a cleaner, more current look with tile down to the counter.
Can tile go over drywall?
Usually. Painted drywall is cleaned and scuffed or primed; soft or water-damaged spots are cut out and replaced.
Plainfield contractor registration: do kitchen contractors need it?
Village business license ($25 annually) applies to corporate, retail and home businesses. We take care of that before work starts.
What kind of Plainfield homes do you work in?
In Plainfield we see Greek Revival and Upright and Wing cottages. Each comes with its own walls, wiring and plumbing, and we plan the job around them.
Do you work in my part of Plainfield?
Yes. Our crews work across Plainfield — ZIP 60544, 60585, 60586, 60543 — and nearby Bolingbrook, Naperville, Aurora.
Working in Plainfield
- Many Plainfield homes were built after 2000, so cabinet boxes and plumbing are usually solid and an update moves fast.
- Most Plainfield homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Downtown Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
ZIP 60544ZIP 60585ZIP 60586ZIP 60543
Kitchen Backsplash Installation nearby
Other kitchen services in Plainfield
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Tile & Grout RepairCracked tiles swapped, loose tiles reset and tired grout redone.
Kitchen Flooring InstallationKitchen flooring: LVP, tile and hardwood.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.