1990s laminate with a built-in backsplash
Original 1990s laminate is a good candidate when it's solid. We coat the top and the integral splash together.
Serving Orland Park & nearby Tinley Park, Woodridge
Countertop Refinishing & Resurfacing in Orland Park, IL
Laminate, cultured marble and tile counters in Orland Park resurfaced with a new stone-look or solid-color coating, no tear-out.
- Serving Orland Park ZIP 60462, 60467
- A new look without tearing the kitchen out
- Clean, protected work area every day
Countertop surfaces we resurface in Orland Park
Resurfacing is a coating, not a new countertop, and it works best on tops that are flat, dry and well attached. Our Orland Park techs check that first, fix chips and loose edges, then apply a multi-coat system you can choose in a speckled granite look or a plain color.
Chips and loose edges before coating
Chipped corners are rebuilt and loose edge strips reglued first; a coating over a loose edge would crack at the joint.
A kitchen you plan to sell soon
Before listing, a resurfaced counter is a short project that removes one dated feature buyers notice.
A previous paint job that is peeling
If an earlier painted finish is flaking, we remove what won't hold, sand to a sound surface and start the coating over.
Scratches, knife marks and stains
We fill cuts and gouges, sand the whole top and lay down fresh coats, which hides most surface damage.
Tile counters with grout that won't come clean
Grout that stays gray no matter how you scrub can be covered. We secure any loose tile, fill the joints and coat the top.
Laminate worn dull or through the pattern
Worn-through patches and a faded surface are cosmetic. As long as the board is sound, a resurfacing system covers them.
Dated cultured marble tops
Cast cultured marble takes a resurfacing coat well once crazing and chips are addressed. Kitchens and vanities both qualify.
What's included
- Inspection for water damageWe press, tap and look along the sink and seams to confirm the base will hold a finish.
- Masking and ventilationCabinets, walls, appliances and floor are covered, and the room is ventilated while we work.
- Deep cleaning and degreasingGrease, soap and silicone residue are removed so primer can grip the surface.
- RepairsChips filled, edges reglued, loose tiles reset and grout joints leveled.
- Sanding and primingA sanded profile and a bonding coat give the finish something to hold.
- Clear topcoatThe final clear layer protects the finish and sets how shiny the counter looks.
- Cure-time and care instructionsYou get written care tips and the wait times before heavy use and cleaning.
Options to choose from
Cultured marbleCast tops in kitchens and vanities that accept a new color after repair and priming.
Resurfacing vs. replacingCoat what is solid and you like the shape of; replace what is swollen, cracked or the wrong layout.
Ceramic tileA coating turns a gridded tile surface into one continuous finish.
Solid colorsPlain white, gray, black or warm neutrals for a simple, modern look.
Laminate (Formica)Plastic laminate is resurfaced after scuffing and a bonding primer.
Countertop Refinishing & Resurfacing before and after — Orland Park homes
Before
AfterOrland Park kitchen, 1990s two-story colonial: countertop refinishing & resurfacing
A 1990s two-story colonial in Orland Park, a typical kitchen for Orland Park. Before: white ceramic tile with dark stained grout lines. The reason for the call: dark grout lines across the counters. After: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. On site this meant inspection for water damage, repairs, plus sanding and priming.
Before
AfterWoodridge kitchen, 1980s two-story: countertop refinishing & resurfacing
A 1980s two-story near The Ridge, a typical kitchen for Woodridge. Before: almond laminate with a backsplash lip. What bothered the owners most: worn laminate in a color they disliked. Finished kitchen: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. On site this meant sanding and priming, clear topcoat, plus cure-time and care instructions.
Countertop Refinishing & Resurfacing in Woodridge →
Before
AfterDowners Grove kitchen, 1950s ranch: countertop refinishing & resurfacing
This one is a 1950s ranch in Downers Grove. The kitchen as it was: light beige laminate. The reason for the call: tired, stained laminate. The result: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. On site this meant deep cleaning and degreasing, repairs, plus clear topcoat.
Countertop Refinishing & Resurfacing in Downers Grove →
Before
AfterOrland Park kitchen, 1980s two-story: countertop fabrication & installation
Finished: black honed granite countertops with a tight seam, an undermount sink and a new faucet.
Countertop Fabrication & Installation in Orland Park →
Before
AfterAn Orland Park two-story colonial from the 1990s: before and after
Finished: cabinets in white uppers and deep green lowers with polished nickel pulls, dark soapstone-look quartz counters, a white herringbone tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Orland Park →How the job goes
- Photos and a quick checkA few photos tell us the material and whether resurfacing is likely to work.
- Color and finish choiceWe bring sample chips so you can see the finish next to your cabinets and floor.
- Prep and coatingWe prepare the tops and build the coating system in stages.
- Cure, then back to useThe finish needs time to harden; we tell you when light use and full use are safe.
Countertop Refinishing & Resurfacing questions from Orland Park homeowners
Does countertop refinishing really work?
On a sound, well-prepped top, yes. Most failures come from poor cleaning, skipped primer or coating over water damage.
Do you refinish bathroom vanity tops?
Yes, cultured marble vanities are a very common resurfacing job.
Can I cut on or set hot pans on a refinished counter?
A resurfaced top isn't made for heavy cutting or hot cookware. Treat it like a finished surface, not a work block.
How long does a resurfaced countertop last?
There's no fixed number. A coating on a well-prepared top, used with care, can look good for a long time; damage spots can be touched up.
Should I resurface or replace my countertops?
Resurface when the tops are sound and you're happy with the layout. Replace when the core is damaged, or when you want real stone or a new shape.
Do I need a Orland Park-registered contractor for countertop resurfacing?
Contractors must be licensed with the Village before permits issue; apply via Civic Access portal. We take care of that before work starts.
Do I need a permit for countertop resurfacing in Orland Park?
It depends on the scope. Orland Park's rule in short: Permit needed for remodeling; application lists electrical and plumbing contractors. We handle the permit when one is needed with Development Services Department - Building Division.
Do you work in my part of Orland Park?
Yes. Our crews work across Orland Park — ZIP 60462, 60467 — and nearby Tinley Park, Woodridge, Bolingbrook.
Working in Orland Park
- A lot of Orland Park kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Orland Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Old Orland Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
ZIP 60462ZIP 60467
Countertop Refinishing & Resurfacing nearby
Other kitchen services in Orland Park
Countertop RepairChips, cracks, seams and burns fixed without replacing the top.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Stone Countertop RestorationEtches, stains and dull spots taken out, then the stone resealed.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.