Serving Hoffman Estates & nearby Schaumburg, Hanover Park

Kitchen Sink Installation & Replacement in Hoffman Estates, IL

Undermount, drop-in and farmhouse sinks set, sealed and connected by licensed plumbers in Hoffman Estates.

  • Installers working in Hoffman Estates ZIP 60192, 60169, 60120, 60010
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Hoffman Estates licensed plumber will call you.

Kitchen sink problems we fix in Hoffman Estates

Swapping a sink looks simple until the new bowl doesn't match the cutout or the drain lands in the wrong spot. Our Hoffman Estates crew measures first, then sets the sink and has a licensed plumber hook up the drain and supplies.

1970s stainless double sink

Many 1970s kitchens still have the original drop-in double sink. We swap it for a deeper bowl and new strainers.

Undermount sink pulling away from the counter

If the sink has dropped and water runs into the cabinet, it can usually be reattached without replacing the counter. We support it from below and bond it again.

Old drain parts that won't line up

A new sink often puts the drain in a different spot or depth. We rebuild the trap and tailpieces in new PVC so everything lines up without strain.

Sink that drains slowly after replacement

If a new sink gurgles or holds water, the drain geometry is off. We reset the trap and arm so water runs freely.

Strainer or drain leaking

Old strainers loosen and their seals dry out. We install new ones and tighten them so the joint stays dry.

New sink doesn't match the counter cutout

Undermount sinks need a cutout that matches their bowl shape. We confirm the size and the reveal before the old sink comes out.

Faucet holes don't match the new faucet

We plan the faucet, sprayer, soap dispenser and any filtered-water tap together, so the holes and the sink line up.

Sink installed with the counter replacement

New countertops are the best time for a new sink. We coordinate the cutout with the fabricator and do the hookup after install.

What we hook up and check

  • Measure the cutout and cabinetWe measure the counter opening, the sink base and the drain position before you pick a sink.
  • Shut off and disconnectWe close the valves and take apart the drain, supply and appliance connections.
  • Remove the old sinkThe old sink taken out without damaging the counter edge.
  • Prepare the openingThe counter opening cleaned and adjusted for the new bowl.
  • Set and seal the sinkThe bowl mounted level and sealed to the counter.
  • Faucet and accessoriesYour old faucet reused or a new one mounted on the sink or counter.
  • Supply valves and linesFresh supply connections from the valves to the faucet.

What to pick before the install

Stainless steelEasy-care steel; a lower gauge number means thicker metal.
Granite compositeQuartz or granite composite bowls in solid colors, resistant to scratches.
Farmhouse (apron-front)Apron sinks sit forward of the cabinets and need support built in.
FireclayA smooth, hard-glazed bowl that needs solid support in the cabinet.
Workstation sinksSinks with built-in rails that hold accessories over the basin.

Kitchens like yours in Hoffman Estates: before and after

Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a 1990s two-story colonial in Hoffman Estates

A 1990s two-story colonial in Hoffman Estates, a typical kitchen for Hoffman Estates. Before: solid-surface integrated sink. What bothered the owners most: a stained solid-surface bowl. The result: a new undermount stainless single-bowl sink with a pull-down faucet. The job covered set and seal the sink, faucet and accessories, plus supply valves and lines.

Kitchen Sink Installation & Replacement project in Schaumburg, beforeBefore
Kitchen Sink Installation & Replacement project in Schaumburg, afterAfter

Kitchen Sink Installation & Replacement in a two-story colonial from the 1990s, Schaumburg

A two-story colonial from the 1990s near Weathersfield, a typical kitchen for Schaumburg. Before: white double sink. What bothered the owners most: a divided sink too narrow for sheet pans. After: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant remove the old sink, set and seal the sink, plus supply valves and lines.

Kitchen Sink Installation & Replacement in Schaumburg →
Kitchen Sink Installation & Replacement project in Hanover Park, beforeBefore
Kitchen Sink Installation & Replacement project in Hanover Park, afterAfter

Kitchen Sink Installation & Replacement in a 1980s two-story, Hanover Park

A 1980s two-story near Ontarioville, a typical kitchen for Hanover Park. What we started with: white cast-iron double sink. What bothered the owners most: a chipped porcelain sink with stains that wouldn't scrub out. After: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant shut off and disconnect, remove the old sink, plus supply valves and lines.

Kitchen Sink Installation & Replacement in Hanover Park →
Kitchen Remodeling project near Hoffman Estates, beforeBefore
Kitchen Remodeling project near Hoffman Estates, afterAfter

Before and after: a raised ranch in Hoffman Estates

Finished: cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.

Kitchen Remodeling in Hoffman Estates →
Kitchen Cabinet Painting project near Hoffman Estates, beforeBefore
Kitchen Cabinet Painting project near Hoffman Estates, afterAfter

A Hoffman Estates 1970s tract home: before and after

Finished: the same doors sprayed in sage green, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Hoffman Estates →

How the install goes

  1. Pick the sinkSend the model you like or let us suggest a few that fit.
  2. Measure and planWe check the cutout, the cabinet and the drain, and plan any cabinet changes.
  3. Written estimateA clear quote listing the sink work, parts and any cabinet modifications.
  4. Install and connectWe mount the sink and hook up the drain, faucet and appliances.
  5. Cure and testAfter the bond sets, the sink is tested in full use.

Kitchen Sink Installation & Replacement questions from Hoffman Estates homeowners

Will Lake Michigan water mark my new sink?
Some spotting is normal. A quick dry-off and an occasional vinegar rinse keep the bowl clean.
How long does a sink replacement take?
Usually one visit for a drop-in, sometimes a return visit for an undermount after the bond cures.
What size sink fits my cabinet?
Measure the sink base, not the old sink. We check the inside width and depth so the new bowl and its clips fit.
Can I switch from a drop-in to an undermount sink?
With granite or quartz counters, it's possible: the cutout is finished and the sink mounted below. We check the opening size first.
Can I keep my countertop when replacing the sink?
Yes in most cases. We match the new sink to the existing opening so the counter stays.
Does sink replacement need a Hoffman Estates building permit, and who files it?
Permits go through Development Services Department - Code Enforcement (Building Permits) (BS&A Online Permit Portal), phone (847) 781-2631. When your scope needs one, we prepare the application and schedule the inspections.
Is Hoffman Estates water hard, and does it matter for sink replacement?
Hoffman Estates's water source: Lake Michigan water purchased from the City of Chicago, delivered via the Northwest Suburban Municipal JAWA (since 1985); six emergency backup wells. We plan fittings and filters around it.
Hoffman Estates contractor registration: do kitchen contractors need it?
Contractors must register through a BS&A Online Contractor account (annual registration form and documents) and submit the Contractor/Design Professionals Registration Form and a Workers Compensation Affidavit. No fee stated. We take care of that before work starts.
Does Hoffman Estates have lead service lines?
Village completed a service line material inventory and concluded there are no lead service lines in the Village. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Hoffman Estates plumbing code: who can do the plumbing for sink replacement?
Applicable codes include the Illinois Plumbing Code; permit requires a complete written scope of plumbing work. Our plumbing connections are made by licensed plumbers.
Do I need a permit for sink replacement in Hoffman Estates?
It depends on the scope. Hoffman Estates's rule in short: Kitchen remodels go through the Residential Remodel permit: submit plans (1/4 inch scale) of existing and proposed kitchen showing plumbing fixtures, outlets, appliances and panel, plus a scope of work or contract. We handle the permit when one is needed with Development Services Department - Code Enforcement (Building Permits).
Do you work in my part of Hoffman Estates?
Yes. Our crews work across Hoffman Estates — ZIP 60192, 60169, 60120, 60010 — and nearby Schaumburg, Hanover Park, Palatine.

Working in Hoffman Estates

  • A lot of Hoffman Estates kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Hoffman Estates homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Development Services Department - Code Enforcement (Building Permits) handles kitchen permits and pull them for you.

ZIP 60192ZIP 60169ZIP 60120ZIP 60010

Kitchen Sink Installation & Replacement nearby

Planning a kitchen project in Hoffman Estates?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback