Basement bar in a Glenview house
In a basement, the location of the main stack and floor drain usually decides where a wet bar can go.
Serving Glenview & nearby Northbrook, Park Ridge
Home Bars & Coffee Stations in Glenview, IL
Built-in wet bars, dry bars and coffee stations for Glenview kitchens, dining rooms and basements.
- Local crews working in Glenview ZIP 60025, 60026, 60062
- Design, permits and every trade on one schedule
- A written, itemized estimate before any work
Home bar and coffee station problems we solve in Glenview
Whether you want a dry bar for glassware and bottles or a full wet bar with a sink and an under-counter fridge, we plan it around the space and the utilities nearby. In Glenview we often turn an unused basement corner or a dining room wall into a built-in that looks like it came with the house.
Coffee gear taking over the counter
If the coffee setup claims the best stretch of counter, a built-in station nearby frees it up and keeps beans, cups and filters in one place.
Bar that doesn't match the house
A built-in bar should look like part of the home. We match cabinet style, trim and finishes to nearby rooms.
Dark corner with no lighting
Under-cabinet lights, shelf lighting and a pendant make a bar or coffee station usable and inviting.
Plumbed espresso machine and filtered water
Coffee tastes better with filtered water, and a plumbed machine never runs dry. We plan the line and filter location.
Unused dining room or hallway wall
We often turn a narrow wall into a built-in with cabinets below and glass or open shelving above.
Beverage fridge overheating or failing
A beverage cooler squeezed into a cabinet without airflow works hard and fails early. We use built-in rated units or leave the required clearance.
Ice maker that needs a drain
We check the ice maker's requirements for water, drain and power early, since they set where it can sit.
Everything in a home bar or coffee station
- Visit and planningWe look at the location, measure and check where water, drain and power are.
- Design and appliance selectionWe lay out cabinets, counter, sink and appliances using each appliance's installation specs.
- Permits where requiredPlumbing and electrical work may need permits; we handle them.
- Plumbing rough-inFor a wet bar, a licensed plumber runs supply lines and the drain with proper venting.
- Electrical rough-inWe have new outlets, circuits and lighting wired before the walls are closed.
- Cabinet installationWe set the cabinets, with openings sized for the fridge or ice maker.
- Test and handoverEvery connection is checked before we show you around.
Finishes and options
Under-counter ice makersBuilt-in ice makers with water and drain connections.
Cabinet styles to matchShaker, flat-panel or raised-panel doors in paint or stain to match the house.
Bar sinks and faucetsSmall sinks made for bars, matched with a faucet that fits the space.
Beverage fridges and wine coolersUnder-counter fridges and coolers chosen to fit and vent correctly.
Glass-front doors and open shelvingShow glassware and bottles while keeping the rest hidden.
What the work looks like in Glenview homes
Before
AfterA Glenview 1960s ranch: before and after
The site: a 1960s ranch in Glenview. The main complaint was an unused corner with no purpose. Finished kitchen: a built-in wet bar with base cabinets, a beverage fridge, open shelves and a small bar sink. On site this meant visit and planning, permits where required, plus electrical rough-in.
Before
AfterHome Bars & Coffee Stations in a 1950s ranch, Northbrook
The site: a 1950s ranch in Northbrook. The main complaint was an unused corner with no purpose. After: a built-in wet bar with base cabinets, a beverage fridge, open shelves and a small bar sink. On site this meant visit and planning, plumbing rough-in, plus electrical rough-in.
Home Bars & Coffee Stations in Northbrook →
Before
AfterPark Ridge kitchen, 1960s ranch: home bars & coffee stations
The site: a 1960s ranch in Park Ridge. The main complaint was an unused corner with no purpose. The result: a built-in wet bar with base cabinets, a beverage fridge, open shelves and a small bar sink. Work included visit and planning, design and appliance selection, plus permits where required.
Home Bars & Coffee Stations in Park Ridge →
Before
AfterA Glenview 1950s ranch: before and after
Cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Glenview →
Before
AfterGlenview kitchen, postwar Cape Cod: kitchen cabinet painting
Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glenview →From first visit to final walk-through
- Tell us what you wantA few pictures and your must-haves help us plan the visit.
- Visit and designOn site we confirm what fits and where water and power come from.
- Written estimateYou get an itemized estimate and, once approved, a schedule.
- Build and connectWe build it, connect it and test everything.
Home Bars & Coffee Stations questions from Glenview homeowners
Does a beverage fridge need ventilation?
Yes. Built-in rated models vent through the front; others need open space around them per the maker's instructions.
How much does a home bar cost?
Plumbing and appliances drive the price most, then the cabinets and top. You get a line-item estimate.
How long does it take to build a home bar?
A dry bar or coffee station often takes days; a wet bar with plumbing and a custom counter takes longer because of templating and inspections.
Do coffee stations need a dedicated circuit?
Often, yes. It keeps breakers from tripping when several appliances are on.
Can I add a wet bar to my basement?
Usually, if a drain can be reached. The location of the main stack or a drain pump decides where the sink goes. Plumbing is done by a licensed plumber.
Do I need a Glenview-registered contractor for home bar or coffee station?
General and demolition contractors register with the Village: $50 fee, $25,000 bond, certificate of insurance and workers comp proof. Unlisted contractor types need no registration. We take care of that before work starts.
Does home bar or coffee station need a Glenview building permit, and who files it?
Permits go through Community Development, Inspectional Services Division (Development Center), phone (847) 904-4330. When your scope needs one, we prepare the application and schedule the inspections.
Does Glenview require a licensed electrician for home bar or coffee station?
Electricians register with the Village by submitting a copy of their license; no fee or bond listed. New circuits and wiring are done by licensed electricians.
Does Glenview require a licensed plumber for home bar or coffee station?
Plumbers register by submitting a copy of their 055 State license and a Letter of Intent; no fee or bond. Our plumbing connections are made by licensed plumbers.
Do I need a permit for home bar or coffee station in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Home Bars & Coffee Stations nearby
Other kitchen services in Glenview
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.