2000s laminate with a built-in backsplash
Original 2000s laminate is a good candidate when it's solid. We coat the top and the integral splash together.
Serving Glenview & nearby Northbrook, Park Ridge
Countertop Refinishing & Resurfacing in Glenview, IL
Laminate, cultured marble and tile counters in Glenview resurfaced with a new stone-look or solid-color coating, no tear-out.
- Serving Glenview ZIP 60025, 60026, 60062
- A new look without tearing the kitchen out
- Clean, protected work area every day
Countertop surfaces we resurface in Glenview
Resurfacing is a coating, not a new countertop, and it works best on tops that are flat, dry and well attached. Our Glenview techs check that first, fix chips and loose edges, then apply a multi-coat system you can choose in a speckled granite look or a plain color.
Matching new cabinet paint
Many people resurface counters along with a cabinet repaint, so the whole kitchen changes together without a remodel.
Laminate swollen around the sink
Raised, spongy laminate at the sink means the core is wet. We won't coat over it; new tops are the right fix there.
Scratches, knife marks and stains
Stains that bleach won't touch and a web of cutting marks are covered after prep, leaving a smooth, uniform surface.
A previous paint job that is peeling
Peeling DIY coatings come off first. Then we prime for adhesion and build the finish in the right number of coats.
Dated cultured marble tops
Cultured marble with a yellowed gel coat or a swirl pattern you never liked can be repaired and coated in a new color.
Tile counters with grout that won't come clean
Resurfacing tile hides stained grout and gives you a single flat-looking surface. Deep grout joints are filled first.
Laminate worn dull or through the pattern
Laminate that has lost its pattern in the work zones can be scuffed, primed and coated so the surface is even again.
What's included
- Inspection for water damageWe press, tap and look along the sink and seams to confirm the base will hold a finish.
- Masking and ventilationCabinets, walls, appliances and floor are covered, and the room is ventilated while we work.
- Deep cleaning and degreasingThe tops are degreased thoroughly, since contamination is the main reason coatings fail.
- Sanding and primingThe surface is scuffed for adhesion and primed with a bonding primer.
- Clear topcoatThe final clear layer protects the finish and sets how shiny the counter looks.
- RecaulkingJoints at the wall and sink are sealed again after coating.
- Cure-time and care instructionsWe tell you when you can use the counter lightly and when it reaches full hardness.
Materials and finishes
Laminate (Formica)Plastic laminate is resurfaced after scuffing and a bonding primer.
Resurfacing vs. replacingResurfacing changes the look of sound tops; replacement is for damaged substrates or a material change.
Stone-look finishesLayered color chips under a clear coat for depth and a natural look.
Solid colorsA single uniform color, often paired with a satin topcoat.
Cultured marbleCast tops in kitchens and vanities that accept a new color after repair and priming.
Before and after: kitchens near Glenview
Before
AfterBefore and after: a postwar Cape Cod in Glenview
A postwar Cape Cod near The Glen, a typical kitchen for Glenview. What we started with: speckled laminate. The reason for the call: tired, stained laminate. After: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. The job covered inspection for water damage, deep cleaning and degreasing, plus cure-time and care instructions.
Before
AfterCountertop Refinishing & Resurfacing in a postwar bi-level, Park Ridge
A postwar bi-level in Park Ridge, a typical kitchen for Park Ridge. The kitchen as it was: laminate with an aluminum edge band. The reason for the call: tired, stained laminate. Finished kitchen: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. Work included inspection for water damage, masking and ventilation, plus cure-time and care instructions.
Countertop Refinishing & Resurfacing in Park Ridge →
Before
AfterCountertop Refinishing & Resurfacing in a 1950s ranch, Des Plaines
A 1950s ranch in Des Plaines, a typical kitchen for Des Plaines. What we started with: light beige laminate. The main complaint was tired, stained laminate. The result: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. The job covered masking and ventilation, sanding and priming, plus recaulking.
Countertop Refinishing & Resurfacing in Des Plaines →
Before
AfterA Glenview 1950s ranch: before and after
What changed: black honed granite countertops with a tight seam, an undermount sink and a new faucet.
Countertop Fabrication & Installation in Glenview →
Before
AfterA Glenview postwar Cape Cod: before and after
What changed: cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Glenview →How your countertop resurfacing goes
- Photos and a quick checkSend pictures of the counters and the sink area; we look for signs of water damage first.
- Color and finish choicePick a stone-look or solid color from samples, plus satin or gloss.
- Prep and coatingMasking, cleaning, repairs, priming and the finish coats, usually over one to two days.
- Cure, then back to useThe finish needs time to harden; we tell you when light use and full use are safe.
Countertop Refinishing & Resurfacing questions from Glenview homeowners
What does countertop resurfacing cost?
We price it after checking the tops, since repairs and tile filling change the work. The estimate comes in writing.
How soon can I use the counters?
Cure time depends on the coating and the room temperature. Plan on gentle use for the first several days.
Is it the same as painting my countertops?
Similar idea, different materials. Our coatings are made for countertops and are applied in several coats over a primed surface.
Do you refinish bathroom vanity tops?
We do. A matching vanity finish is easy to add while we're set up.
How long does a resurfaced countertop last?
There's no fixed number. A coating on a well-prepared top, used with care, can look good for a long time; damage spots can be touched up.
Glenview contractor registration: do kitchen contractors need it?
General and demolition contractors register with the Village: $50 fee, $25,000 bond, certificate of insurance and workers comp proof. Unlisted contractor types need no registration. We take care of that before work starts.
Do I need a permit for countertop resurfacing in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Countertop Refinishing & Resurfacing nearby
Other kitchen services in Glenview
Countertop RepairChips, cracks, seams and burns fixed without replacing the top.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Stone Countertop RestorationEtches, stains and dull spots taken out, then the stone resealed.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.