Serving Glendale Heights & nearby Bloomingdale, Carol Stream

Microwave Repair in Glendale Heights, IL

Microwave runs but won't heat, sparks or has a dead display? We repair over-the-range and built-in microwaves in Glendale Heights.

  • Technicians covering Glendale Heights ZIP 60139
  • Diagnosis first, then a written price for the repair
  • Honest advice when replacing makes more sense

Prefer a callback?

Leave your number and a Glendale Heights microwave technician will call you.

Microwave problems we fix in Glendale Heights

We repair microwaves that won't heat, won't start, spark inside, have dead keypads or a broken door. For Glendale Heights homes with a countertop model, we'll usually tell you a new one is the better buy; for an over-the-range or built-in unit, a repair is often worth it.

Over-the-range microwave in a condo

In a condo we work within building rules and repair the unit over the range, keeping the space below protected.

Light or vent fan out on an over-the-range unit

Over-the-range units also act as a hood. When the vent fan or light quits, we repair them so the cooktop gets ventilated again.

Countertop microwave that stopped working

Countertop models are often not worth a service visit. Unless it's a higher-end unit, we'll recommend replacement.

Built-in or drawer microwave failure

A trim-kit or drawer microwave is part of the cabinet layout, and a replacement may not fit the same opening. We diagnose and repair it.

Burning smell or smoke

A burning smell with no food burning means unplug it and stop using it. It can be an overheated part, arcing or wiring. We diagnose it safely.

Fan runs by itself

If the fan won't shut off, we test the thermal sensor and the control before replacing parts.

Loud humming, buzzing or grinding

A loud hum, especially with no heat, often points to a failing magnetron or a shorted diode. Grinding usually comes from the turntable or fan.

Sparking inside the microwave

Arcing can damage the magnetron if it continues. We replace the waveguide cover, clean the cavity and check for damage.

What we check and fix

  • Symptom and safety checkBefore any panel comes off, we look at power to the unit and whether the door engages its switches.
  • Unit taken down if neededBuilt-in units are pulled from their trim kit only when necessary.
  • High-voltage dischargeNo internal test starts until the stored charge in the high-voltage circuit is drained.
  • Component testsEach part of the heating circuit checked with a meter.
  • Cavity and waveguide inspectionWe look for burn marks and grease that cause sparking.
  • Written quoteYou see the cost and our honest view before work starts.
  • Remount and testOver-the-range units remounted on the wall plate, then heat, fan and light tested.

Repair options

Over-the-range microwavesMicrowaves mounted above the cooktop with a vent fan and light.
Microwave drawersUnits that open like a drawer below the counter, often in an island.
Vent fan, light and filter partsExhaust fan motors, cooktop light sockets, grease filters and charcoal filters for over-the-range models.
Built-in and trim-kit microwavesUnits built into the cabinetry.
High-voltage partsThe sealed-off section that produces microwave energy, serviced only by trained technicians.

Kitchens like yours in Glendale Heights: before and after

Microwave Repair in a 1980s-1990s two-story colonial / tract house — problemProblem
Microwave Repair in a 1980s-1990s two-story colonial / tract house — fixedFixed
Microwave Repair in a 1980s-1990s two-story colonial / tract house — detailDetail

A Glendale Heights 1990s two-story colonial: before and after

This one is a 1990s two-story colonial in Glendale Heights. What we started with: white appliances. The main complaint was a broken door handle on the over-the-range microwave. After: the over-the-range microwave with a new door handle and a lit display, heating again. Work included symptom and safety check, unit taken down if needed, plus written quote.

Microwave Repair project in Bloomingdale, beforeBefore
Microwave Repair project in Bloomingdale, afterAfter

Microwave Repair in a 1980s two-story, Bloomingdale

The site: a 1980s two-story near Old Town Bloomingdale. What we started with: black appliances. The reason for the call: an over-the-range microwave that stopped heating. Finished kitchen: the over-the-range microwave with a new door handle and a lit display, heating again. Work included symptom and safety check, cavity and waveguide inspection, plus written quote.

Microwave Repair in Bloomingdale →
Kitchen Remodeling project near Glendale Heights, beforeBefore
Kitchen Remodeling project near Glendale Heights, afterAfter

A Glendale Heights two-story colonial from the 1990s: before and after

What changed: cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Glendale Heights →
Kitchen Cabinet Painting project near Glendale Heights, beforeBefore
Kitchen Cabinet Painting project near Glendale Heights, afterAfter

Kitchen Cabinet Painting in a 1990s two-story colonial, Glendale Heights

Finished: the same doors sprayed in forest green, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Glendale Heights →

From diagnosis to fixed

  1. Tell us the type and symptomOver-the-range, built-in or countertop, the model number and what it's doing.
  2. Repair or replace adviceFor countertop units we'll often tell you up front that replacing makes more sense.
  3. Diagnosis and written quoteA technician tests the unit safely and quotes the parts and labor in writing.
  4. Repair and testThe part goes in, the unit is remounted and tested with heat, fan and light.

Microwave Repair questions from Glendale Heights homeowners

What usually breaks in a microwave?
The high-voltage parts and the door switches fail most often, followed by keypads and turntable motors.
Why is my microwave sparking?
Sparking that continues can damage the magnetron. Unplug it and have it looked at.
How much does microwave repair cost?
The part, labor and whether the unit has to come down set the price. We put it in writing first.
Is it worth repairing a microwave?
We give you an honest answer by type and age. A rule of thumb many use: if the repair costs more than half of a new unit, replace it.
Which brands do you repair?
Most household brands. The model number tells us what to bring.
Can you do microwave repair in a Glendale Heights condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do I need a permit for microwave repair in Glendale Heights?
It depends on the scope. Glendale Heights's rule in short: Permits required for most construction projects; a Residential Remodel/Alteration application exists; call Community Development if unsure. We handle the permit when one is needed with Community Development Department.
Do you work in my part of Glendale Heights?
Yes. Our crews work across Glendale Heights — ZIP 60139 — and nearby Bloomingdale, Carol Stream, Addison.

Working in Glendale Heights

  • A lot of Glendale Heights kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • We know how Community Development Department handles kitchen permits and pull them for you.

ZIP 60139

Microwave Repair nearby

Planning a kitchen project in Glendale Heights?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback