Serving Elk Grove Village & nearby Itasca, Wood Dale

Hardwood Floor Repair & Refinishing in Elk Grove Village, IL

Worn, stained and water-marked hardwood in Elk Grove Village kitchens sanded, repaired board by board and refinished.

  • Serving Elk Grove Village ZIP 60007
  • A new look without tearing the kitchen out
  • Clean, protected work area every day

Prefer a callback?

Leave your number and a Elk Grove Village hardwood floor refinisher will call you.

Hardwood floor problems we repair in Elk Grove Village

A solid hardwood floor can usually be sanded and refinished more than once, which makes repair far less disruptive than replacement. Our Elk Grove Village crew matches the species and width of your boards, fixes water-damaged areas and finishes the kitchen to blend with the rooms next to it.

Wood hidden under old vinyl or tile

Uncovering hardwood under old vinyl starts with a test of the tile and glue. Once it's cleared or abated, we can assess and refinish the wood.

Cupped or crowned boards

Wavy boards near the sink or a leaky dishwasher need the water source fixed. Many settle back partly once dry; the rest are sanded flat or replaced.

Matching the kitchen to the next room

Kitchen floors that look different from the adjoining wood can be sanded together and finished in one color.

Dull finish that is otherwise intact

If the finish is dull but not worn through, a screen-and-recoat — abrading the top coat and adding fresh finish — restores the sheen without sanding to bare wood.

White water marks in the finish

If the mark is white or milky, moisture is trapped in the coating. That is good news: the wood below is often fine.

Squeaky or loose boards

Loose boards are refastened from above with trim-head screws or face nails that are filled, or from below when there is basement access.

Damaged boards that need replacing

Board replacement follows the floor's pattern. Staggered ends make the new wood hard to find once it is refinished.

Gray, worn traffic paths

Dull lanes where everyone walks mean the protective coating is gone. Once wood shows through, a full sand and refinish is usually the right repair.

What's included

  • Floor assessmentA close look at the wood, the stains and the existing finish to decide between recoat, refinish and repair.
  • Moving appliances and protecting the roomThe fridge and range come out, cabinets and doorways are covered and the space is sealed off.
  • Board repair and replacementDamaged boards are cut out and new ones woven in, staggered to match the floor's pattern.
  • SandingThe floor is sanded in progressive grits with a drum or belt sander and an edger along cabinets.
  • Stain and color samplesStain samples on your own sanded floor so you see the real color before committing.
  • Finish coatsMultiple finish coats built up with buffing between them for a smooth surface.
  • Trim and thresholdsShoe molding, toe-kick trim and thresholds are reset or replaced after the finish cures.

Options to choose from

Replacement boardsSame species, grade and width — commonly red or white oak strip — from new stock or salvage.
Wood stainColors from light natural to deep brown, tested on the sanded floor.
Hardwax oil finishesPenetrating oil finishes that are easy to touch up in high-wear spots.
Oil-modified polyurethaneA warm, amber-toned finish with a longer dry time and a stronger odor while curing.
Engineered hardwoodA wood wear layer over plywood; how often it can be sanded depends on that layer's thickness.

What the work looks like in Elk Grove Village homes

Hardwood Floor Repair & Refinishing in a postwar ranch / cape cod / bi-level — beforeBefore
Hardwood Floor Repair & Refinishing in a postwar ranch / cape cod / bi-level — afterAfter

Hardwood Floor Repair & Refinishing in a postwar Cape Cod, Elk Grove Village

The site: a postwar Cape Cod in Elk Grove Village. What bothered the owners most: a worn finish that no longer protected the wood. After: the oak floor sanded and refinished with a satin clear finish, grain visible and the water marks gone. Work included floor assessment, moving appliances and protecting the room, plus trim and thresholds.

Hardwood Floor Repair & Refinishing project in Itasca, beforeBefore
Hardwood Floor Repair & Refinishing project in Itasca, afterAfter

An Itasca two-story colonial from the 1990s: before and after

The site: a two-story colonial from the 1990s near North Side. The main complaint was gray traffic paths and water marks by the sink. Finished kitchen: the oak floor sanded and refinished with a satin clear finish, grain visible and the water marks gone. On site this meant sanding, finish coats, plus trim and thresholds.

Hardwood Floor Repair & Refinishing in Itasca →
Hardwood Floor Repair & Refinishing project in Wood Dale, beforeBefore
Hardwood Floor Repair & Refinishing project in Wood Dale, afterAfter

Before and after: a postwar bi-level in Wood Dale

The site: a postwar bi-level in Wood Dale. The reason for the call: dark water stains in front of the dishwasher. Finished kitchen: the oak floor sanded and refinished with a satin clear finish, grain visible and the water marks gone. On site this meant sanding, stain and color samples, plus trim and thresholds.

Hardwood Floor Repair & Refinishing in Wood Dale →
Kitchen Remodeling project near Elk Grove Village, beforeBefore
Kitchen Remodeling project near Elk Grove Village, afterAfter

An Elk Grove Village postwar Cape Cod: before and after

What changed: cabinets in light butter yellow with polished nickel pulls, black honed granite counters, a gray beveled subway tile backsplash, light oak hardwood flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Elk Grove Village →
Kitchen Cabinet Painting project near Elk Grove Village, beforeBefore
Kitchen Cabinet Painting project near Elk Grove Village, afterAfter

Before and after: a postwar bi-level in Elk Grove Village

The same doors sprayed in creamy white uppers and navy lowers, new brushed nickel bar pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Elk Grove Village →

How the job goes

  1. Look at the floorWe visit, test moisture where needed and tell you whether to recoat, refinish or replace boards.
  2. Plan the workWe agree on color, finish and the rooms included before work starts.
  3. Repair and sandDamaged boards replaced, then the floor sanded and stained; a kitchen refinish often takes a few days.
  4. Finish and cureCoats applied, appliances returned once the finish allows and care tips left.

Hardwood Floor Repair & Refinishing questions from Elk Grove Village homeowners

What affects the cost of refinishing a kitchen floor?
The floor area, how many boards need replacing, stain versus natural, the finish and whether adjoining rooms are included. We give a written, itemized estimate after the visit.
Waterborne or oil-based finish?
Waterborne finishes stay clearer, dry faster and smell less. Oil-modified finishes add warm amber tones and take longer to dry.
Can water-damaged hardwood be repaired?
It depends on how far the water went. Finish-level marks refinish out; wood-level stains and rot mean new boards.
Can you match new boards to an old floor?
We match species, width and grade, weave them into the existing pattern and refinish the area so color blends.
Is it cheaper to refinish or replace a hardwood floor?
If the floor can be sanded, refinishing and spot board repair normally make more sense than tearing it out.
Do you work in my part of Elk Grove Village?
Yes. Our crews work across Elk Grove Village — ZIP 60007 — and nearby Itasca, Wood Dale, Schaumburg.

Working in Elk Grove Village

  • A lot of Elk Grove Village kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Elk Grove Village homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Older paint is treated with lead-safe practices: containment, HEPA cleanup and a clean hand-over.

ZIP 60007

Hardwood Floor Repair & Refinishing nearby

Planning a kitchen project in Elk Grove Village?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback