Dripping grease or water from the hood
Drips onto the cooktop point to buildup the filters can no longer hold, or rain getting in at a poorly sealed cap. We find the source.
Serving Buffalo Grove & nearby Arlington Heights, Palatine
Range Hood Repair in Buffalo Grove, IL
Fan dead, lights out or a hood that rattles and roars? We repair range hoods in Buffalo Grove and tell you plainly when replacing makes more sense.
- Repairs across Buffalo Grove ZIP 60089
- We find the cause, not just the symptom
- Parts and labor quoted before work starts
Range hood problems we fix in Buffalo Grove
A hood that hums but won't spin, a light that stays dark, a fan stuck on one speed or a rattle that gets louder every week: these are everyday repairs. Our Buffalo Grove technicians diagnose the hood in place and fix it without tearing out cabinets.
Loud rattling or grinding
Rattles usually come from a loose blower wheel, a loose filter or a damper flap. Grinding usually means the motor bearings are wearing out.
Fan stuck on one speed
If the hood only runs on high, or only on low, the speed switch or the control board has usually failed. We replace the part for your model.
Light not working but the fan is
A dark light with a working fan is usually a bulb, a socket or the light switch. We swap the bulb type the hood calls for or replace the socket.
Fan and light both dead
If nothing on the hood responds, we start with the power supply: the breaker, the wiring connection in the hood and the main control board.
Hood that hums but won't spin
When you hear the motor trying but nothing turns, we check the capacitor where there is one and whether the shaft turns freely.
Fan not working but the light is
When the lights come on and the fan stays silent, the usual suspects are the fan switch, the speed control or the motor itself. We test each before ordering a part.
Burning smell when the fan runs
A hot or burning smell can be grease cooking off the motor or a motor that is overheating. Turn it off and have it checked.
What the repair visit covers
- DiagnosisA step-by-step check of the hood's electrical and mechanical parts.
- Fan motor replacementA new motor fitted, wired and balanced on its mount.
- Blower wheel serviceThe wheel removed, degreased and balanced, or swapped for a new one.
- Switches and control boardsFaulty controls swapped so every speed and setting responds again.
- Lights and socketsBulbs, sockets, LED modules and light switches replaced to match the hood.
- Damper and duct checkBackdraft dampers freed or replaced, the duct and exterior cap checked for blockage.
- Noise and vibration fixesVibration traced and fixed at the motor, wheel or hood mounting.
Common fixes and parts
Fan motors and blower wheelsThe parts that move air, and the ones most often worn out.
LightsOlder halogen bulbs or newer LED strips, depending on the hood.
FiltersMetal filters catch grease; charcoal filters treat odor in ductless setups.
Switches, keypads and boardsMechanical rocker or slide switches on simpler hoods; touch keypads and control boards on newer ones.
Island hoods and insertsInserts inside custom covers, serviced through the filter opening.
Range Hood Repair before and after — Buffalo Grove homes
Problem
Fixed
DetailBefore and after: a two-story colonial from the 1990s in Buffalo Grove
This one is a two-story colonial from the 1990s near The Highlands. Before: almond appliances and a fluorescent box light in the ceiling. The reason for the call: a hood that rattled every time it ran. Finished kitchen: the same hood with a new fan motor and working LED lights. The job covered diagnosis, blower wheel service, plus lights and sockets.
Before
AfterPalatine kitchen, two-story colonial from the 1990s: range hood repair
This one is a two-story colonial from the 1990s in Palatine. What we started with: white appliances and a brass chandelier over the nook. The reason for the call: a range hood with dead lights and a weak fan. After: the same hood with a new fan motor and working LED lights. On site this meant diagnosis, blower wheel service, plus switches and control boards.
Range Hood Repair in Palatine →
Before
AfterRange Hood Repair in a 1980s two-story, Northbrook
This one is a 1980s two-story near Downtown Northbrook. Before: black appliances and two hanging glass pendants. What bothered the owners most: a hood fan that stopped working. Finished kitchen: the same hood with a new fan motor and working LED lights. Work included diagnosis, switches and control boards, plus noise and vibration fixes.
Range Hood Repair in Northbrook →
Before
AfterResidential Kitchen Hood Cleaning in a 1990s two-story colonial, Buffalo Grove
Finished: the same hood with clean, shining filters.
Residential Kitchen Hood Cleaning in Buffalo Grove →
Before
AfterBefore and after: a two-story colonial from the 1990s in Buffalo Grove
Finished: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in Buffalo Grove →The repair visit
- Describe the problemTell us what the hood does or doesn't do, and send the brand and model from the label inside.
- Diagnosis on siteWe test the hood in place and find the failed part.
- Repair or replaceWe explain what failed and whether the fix is worth it on your hood.
- Fix and testWe repair, reassemble and run the hood before leaving.
Range Hood Repair questions from Buffalo Grove homeowners
When should I replace a range hood instead of repairing it?
Old, unsupported hoods and hoods that never worked well are better replaced. We'll tell you honestly.
Do you repair all range hood brands?
Yes, most makes. Send the model number and we check parts first.
Why does my range hood fan not work but the light does?
It means the fan's own switch or motor has failed while the light circuit is fine.
Why do I feel cold air coming from my hood?
The backdraft damper isn't closing. Grease, a bent flap or a missing damper lets outside air in.
What bulb does my range hood need?
It depends on the hood. The bulb type and wattage are listed in the manual or near the socket; many newer hoods use LED modules instead of bulbs.
Do I need a permit for range hood repair in Buffalo Grove?
It depends on the scope. Buffalo Grove's rule in short: Permit required to replace or modify a kitchen, including replacing cabinetry; replacing a sink or faucet needs a plumbing permit even in the same location; electrical must meet the 2017 NEC. We handle the permit when one is needed with Community Development Services, Building & Zoning Services.
Do you work in my part of Buffalo Grove?
Yes. Our crews work across Buffalo Grove, including The Highlands, Green Knolls, Windfield, Didier Farms — ZIP 60089 — and nearby Arlington Heights, Palatine, Lake Zurich.
Working in Buffalo Grove
- A lot of Buffalo Grove kitchens date from the 1980s. We know these layouts well and what is worth keeping.
- Most Buffalo Grove homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development Services, Building & Zoning Services handles kitchen permits and pull them for you.
The HighlandsGreen KnollsWindfieldDidier Farms
ZIP 60089
Range Hood Repair nearby
Other kitchen services in Buffalo Grove
Range Hood InstallationUnder-cabinet, chimney, island and insert hoods, ducted to the outside.
Residential Kitchen Hood CleaningDegreased filters, fan, hood interior and the duct you can reach.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.