Condo kitchen with limited access
Without a crawlspace or basement below, we route the fridge line inside the cabinets. Building rules on plumbing work are checked first.
Serving Arlington Heights & nearby Mount Prospect, Palatine
Appliance Water Line Installation in Arlington Heights, IL
New water lines for refrigerators, ice makers, pot fillers and coffee machines in Arlington Heights, each with its own shut-off.
- Installers working in Arlington Heights ZIP 60004, 60005
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Appliance water line problems we fix in Arlington Heights
New fridge with a dispenser, a plumbed coffee machine or a pot filler over the range? We run the water line in Arlington Heights, route it through the basement, the cabinets or the wall and test every fitting before the appliance goes back in place.
Leak behind the refrigerator
Slow drips behind a fridge can soak the subfloor for months before anyone notices. We trace the leak and rebuild the connection properly.
No shut-off for the ice maker
Each appliance should have its own shut-off. Then a leak or a fridge swap doesn't mean turning off water to the whole house.
Plumbed coffee or espresso machine
Built-in coffee machines and espresso makers can connect straight to water. We run the line, add a shut-off and a filter if the maker calls for one.
Pot filler over the range
A pot filler is just a faucet on a wall, but the line has to be planned before the backsplash goes up.
Ice maker line frozen
A line run along an outside wall or through an unheated crawlspace can freeze in a Chicago winter. We reroute it inside the heated part of the house.
No water line where the new fridge goes
Buying a fridge with water and ice is easy; getting water to it is plumbing. A dedicated line is run to the space before delivery.
Under-sink filter for the fridge water
One filter for the sink and the fridge means fewer cartridges to buy. We run the line from the filter outlet.
Included with the install
- Check the supply and the routeA look at your pipes and the appliance location to choose the shortest safe route.
- Remove the old saddle and tubingWe take out the old ice maker hookup and patch the pipe where the saddle was.
- Tie into the supplyA real fitting on the supply pipe instead of a clamp-on valve.
- Run the new lineThe line routed through the floor, the wall or the cabinets and secured along the way.
- Recessed valve boxA recessed box with a quarter-turn valve, so the fridge can sit tight to the wall.
- Dedicated shut-offA quarter-turn stop for each appliance, reachable without moving the house main.
- Leak testWe flush the line, test it and check every joint dry before leaving.
What to pick before the install
Braided stainless connectorsThe standard hookup between the valve and the fridge, sized to length.
Recessed outlet boxesA neat, recessed hookup that keeps the valve off the floor and out of the way.
Copper pipeRigid copper where the house is copper or the line runs exposed in a basement.
PEX tubingFlexible supply pipe for the run to the appliance, with few joints in the wall or floor.
Quarter-turn valvesBall valves that open or close fully with a quarter turn and don't seize like old multi-turn stops.
Before and after: kitchens near Arlington Heights
Before
Installed
DetailBefore and after: a two-story colonial from the 1990s in Arlington Heights
A two-story colonial from the 1990s in Arlington Heights, a typical kitchen for Arlington Heights. Before: almond appliances. The reason for the call: an old ice-maker hookup they didn't trust. Finished kitchen: a recessed ice-maker outlet box with a quarter-turn valve and a braided stainless line to the refrigerator. Work included remove the old saddle and tubing, tie into the supply, plus leak test.
Before
AfterBefore and after: a 1990s two-story colonial in Mount Prospect
The site: a 1990s two-story colonial in Mount Prospect. What we started with: white appliances. What bothered the owners most: a fridge with no proper water line. The result: a recessed ice-maker outlet box with a quarter-turn valve and a braided stainless line to the refrigerator. Work included remove the old saddle and tubing, recessed valve box, plus leak test.
Appliance Water Line Installation in Mount Prospect →
Before
AfterPalatine kitchen, 1980s two-story: appliance water line installation
The site: a 1980s two-story in Palatine. What we started with: black appliances. The reason for the call: an old ice-maker hookup they didn't trust. The result: a recessed ice-maker outlet box with a quarter-turn valve and a braided stainless line to the refrigerator. Work included tie into the supply, recessed valve box, plus dedicated shut-off.
Appliance Water Line Installation in Palatine →
Before
AfterArlington Heights kitchen, postwar Cape Cod: kitchen remodeling
What changed: cabinets in dark teal with brushed nickel bar pulls, charcoal concrete-look quartz counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Arlington Heights →
Before
AfterBefore and after: a postwar bi-level in Arlington Heights
Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Arlington Heights →How the install goes
- Tell us the applianceFridge, ice maker, pot filler or coffee machine, and where it will sit.
- Plan the routeA quick look at the basement, cabinets and wall to plan the run.
- Install and connectWe run the line, set the valve and hook up the appliance the same day.
- Test and clean upEvery fitting checked dry and the work area cleaned.
Appliance Water Line Installation questions from Arlington Heights homeowners
Do I need plumber's tape on a fridge water line?
Not on compression fittings. Tape is for threaded pipe joints, and we use it only where the connection calls for it.
Will the appliance store install the water line?
Most delivery installs stop at the existing valve. Running a new line through a wall or floor is plumbing work.
Braided stainless or PEX — which is better?
Both are good. We use PEX or copper for the hidden run and a braided connector at the appliance.
Are saddle valves allowed?
Many codes no longer accept them for new work because they pierce the pipe and tend to leak. We replace them with a tee and a real shut-off.
Do I need a plumber to install a fridge water line?
For a new line, yes. Tying into your pipes is licensed plumbing work; we do it with a proper fitting and a shut-off.
Do Arlington Heights condo associations need to approve water line installation?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Arlington Heights building permit for water line installation: where do I apply?
Permits go through Building & Life Safety Department, phone (847) 368-5560. When your scope needs one, we prepare the application and schedule the inspections.
Does Arlington Heights require a licensed plumber for water line installation?
Plumbing permit application must include a Letter of Intent and an IDPH 055 license. Our plumbing connections are made by licensed plumbers.
Does Arlington Heights have lead service lines?
The Village runs a lead service line replacement program; lead lines can exist on both the public side (Village) and the private side (owner) of a water service. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Is Arlington Heights water hard, and does it matter for water line installation?
Arlington Heights's water source: Lake Michigan water treated at the Evanston plant and delivered through the Northwest Water Commission. We plan fittings and filters around it.
Do I need a permit for water line installation in Arlington Heights?
It depends on the scope. Arlington Heights's rule in short: Remodel permit applications (shown here via a basement remodel checklist dated 2020) require a building permit application, plans and a contractor proposal; plumbing and electrical permit applications are added if applicable. We handle the permit when one is needed with Building & Life Safety Department.
Do you work in my part of Arlington Heights?
Yes. Our crews work across Arlington Heights — ZIP 60004, 60005 — and nearby Mount Prospect, Palatine, Buffalo Grove.
Working in Arlington Heights
- A lot of Arlington Heights kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- We know how Building & Life Safety Department handles kitchen permits and pull them for you.
ZIP 60004ZIP 60005
Appliance Water Line Installation nearby
Other kitchen services in Arlington Heights
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Kitchen Faucet InstallationFaucet swaps and new pull-down faucets.
Garbage Disposal Installation & RepairDisposals unjammed, repaired or replaced, with the drain connected right.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.