Old microwave swap where the holes don't line up
Even same-width models use different mounting points. The old plate comes off, the new template goes up and fresh holes are drilled into the studs and cabinet.
Serving Glenview & nearby Northbrook, Park Ridge
Microwave Installation in Glenview, IL
Over-the-range, drawer and built-in microwaves installed in Glenview: anchored into the wall, bolted to the cabinet and vented the right way.
- Serving Glenview ZIP 60025, 60026, 60062
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Microwave installs we take on in Glenview
Lifting a microwave onto a wall plate is a two-person job, but the real work is around it: finding solid framing, drilling the cabinet to the template, routing the cord to an outlet above and lining up the duct. Our Glenview installers handle all of it and haul the old unit away.
Microwave that sags, wobbles or pulls away from the wall
Gaps behind a microwave or a door that drops when opened usually mean the original install missed the studs. We take it down and fasten it properly.
Should it vent outside or recirculate?
Venting outdoors through a damper is the stronger option for a gas range; recirculation only filters the air. We check what's behind the wall before choosing.
Duct that doesn't line up with the new unit
If the duct is undersized, crushed or blocked, we tell you before install so the fan isn't pushing against a dead end.
Over-the-range microwave replacing a range hood
A hood is usually hardwired and has no outlet above it, while an over-the-range microwave plugs into a receptacle in the cabinet. We add the outlet, reuse or adapt the duct and hang the new unit.
No outlet in the cabinet above
Running an extension cord through the cabinet isn't an option. We have a proper outlet installed above the microwave before we mount it.
Microwave above a pro-style or high-output range
Wide professional ranges often need more ventilation than a microwave can offer. We read both installation guides before recommending a setup.
Microwave drawer in an island or base cabinet
Putting a microwave drawer in the island keeps it within reach for kids and away from the cooktop. We build the cutout to the maker's spec and run power to it.
Included with the install
- Old unit or hood removedThe old microwave or range hood is taken down, its wiring made safe and the bracket removed.
- Outlet and circuitPower where the new unit needs it, with any new circuit wired by a licensed electrician.
- Studs located and wall plate mountedWe find the framing and fasten the bracket to solid wood.
- Cabinet drilled to the templateHoles for the top bolts, the power cord and a top vent cut through the cabinet bottom.
- Blower set and duct connectedWe orient the blower for your vent path and seal the connection to the duct.
- Unit hung and boltedTwo installers lift the microwave onto the plate and draw it tight to the cabinet with the top bolts.
- Testing and haul-awayHeating, exhaust and light tested, old appliance and boxes removed.
Options to choose from
Convection and air-fry combosMicrowaves that also bake, crisp or air-fry, available in over-the-range and built-in styles.
Low-profile over-the-range modelsShorter units that leave more room above the burners where cabinets are low.
Over-the-range microwavesMicrowaves with a built-in exhaust fan and light that mount above the range.
Built-in and trim-kit microwavesUnits framed into cabinetry so they look part of the kitchen.
Microwave drawersUnder-counter microwaves that open like a drawer, often in an island.
Before and after: kitchens near Glenview
Before
Installed
DetailGlenview kitchen, 1990s two-story colonial: microwave installation
This one is a 1990s two-story colonial near The Glen. Before: almond appliances. The main complaint was a decades-old hood and a microwave crowding the counter. After: a new over-the-range microwave installed above the range and vented. The job covered outlet and circuit, studs located and wall plate mounted, plus cabinet drilled to the template.
Before
AfterMicrowave Installation in a 1990s two-story colonial, Northbrook
This one is a 1990s two-story colonial near Techny. The kitchen as it was: black appliances. The main complaint was an over-the-range unit that sagged off its bracket. Finished kitchen: a new over-the-range microwave installed above the range and vented. On site this meant studs located and wall plate mounted, cabinet drilled to the template, plus blower set and duct connected.
Microwave Installation in Northbrook →
Before
AfterA Des Plaines two-story colonial from the 1990s: before and after
This one is a two-story colonial from the 1990s in Des Plaines. What we started with: white appliances. The reason for the call: a weak hood and a microwave stuck on the counter. The result: a new over-the-range microwave installed above the range and vented. The job covered old unit or hood removed, cabinet drilled to the template, plus unit hung and bolted.
Microwave Installation in Des Plaines →
Before
AfterBefore and after: a postwar bi-level in Glenview
Cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Glenview →
Before
AfterBefore and after: a postwar bi-level in Glenview
Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glenview →How the install goes
- Send the model and photosShare the model number and photos of the range wall, the cabinet above and the old unit.
- Fit and power checkClearances, power and duct are checked against the installation guide.
- Written estimateAn itemized estimate covering removal, mounting, venting and any outlet or cabinet work.
- Install and testOld unit down, new one mounted and vented, everything tested and the old microwave hauled off.
Microwave Installation questions from Glenview homeowners
How long does microwave installation take?
A replacement over the range often takes a couple of hours. Jobs with a new outlet, new duct or cabinet cutout take longer.
How high should an over-the-range microwave be above the stove?
The maker's instructions give the minimum. Too low is unsafe over a hot range, so we check it on the visit.
Will you take the old microwave or hood away?
Yes. The old unit leaves with us and goes for recycling.
Can you put a microwave drawer in my island?
Yes in most cases. The island cabinet is adjusted to the maker's cutout and a receptacle is installed behind the drawer.
Is a microwave enough ventilation over a gas range?
For everyday cooking it often is, especially vented outside. For heavy searing or a high-output range, a hood moves more air.
Glenview building permit for microwave installation: where do I apply?
Permits go through Community Development, Inspectional Services Division (Development Center), phone (847) 904-4330. When your scope needs one, we prepare the application and schedule the inspections.
Does Glenview require a licensed electrician for microwave installation?
Electricians register with the Village by submitting a copy of their license; no fee or bond listed. New circuits and wiring are done by licensed electricians.
Do I need a Glenview-registered contractor for microwave installation?
General and demolition contractors register with the Village: $50 fee, $25,000 bond, certificate of insurance and workers comp proof. Unlisted contractor types need no registration. We take care of that before work starts.
Do I need a permit for microwave installation in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Microwave Installation nearby
Other kitchen services in Glenview
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Oven, Range & Cooktop InstallationGas and electric ranges, wall ovens and cooktops, safely connected.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.