Duct that doesn't line up with the new unit
If the duct is undersized, crushed or blocked, we tell you before install so the fan isn't pushing against a dead end.
Serving Bartlett & nearby Hanover Park, Carol Stream
Microwave Installation in Bartlett, IL
Over-the-range, drawer and built-in microwaves installed in Bartlett: anchored into the wall, bolted to the cabinet and vented the right way.
- Installers working in Bartlett ZIP 60103, 60120
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Microwave installs we take on in Bartlett
Most microwave calls we get in Bartlett are one of three jobs: a new over-the-range unit replacing an old one or a hood, a drawer model going into an island, or a built-in with a trim kit set into a wall cabinet. Each has its own cutout, power and venting needs, and we sort those out first.
No outlet in the cabinet above
Over-the-range models plug into a receptacle inside the cabinet overhead. If yours has none, a licensed electrician adds one, often on its own circuit as the maker asks.
Microwave that sags, wobbles or pulls away from the wall
Gaps behind a microwave or a door that drops when opened usually mean the original install missed the studs. We take it down and fasten it properly.
Over-the-range microwave replacing a range hood
Trading a hood for a microwave means a new mounting plate, holes drilled through the cabinet bottom and a receptacle where the hood wire used to be. All three get done in one visit.
Not enough height above the range
Low cabinets above the stove are common in older layouts. We check the clearance against the installation guide and suggest a low-profile unit or a hood when it falls short.
Microwave above a pro-style or high-output range
Some makers don't allow an over-the-range microwave above high-output gas burners, and a microwave fan moves less air than a hood. We check the range's guide first.
Moving the microwave off the counter
Many owners want the counter clear. We look at the range wall, the base cabinets and the wall cabinets to see where a mounted microwave fits best.
Convection or air-fry microwave on an old circuit
Bigger multi-mode microwaves may trip a breaker that also feeds the toaster and coffee maker. A dedicated circuit fixes that.
Included with the install
- Pre-install checkWe compare the model's guide with your cabinet width, cooktop clearance, outlet location and duct.
- Old unit or hood removedThe old microwave or range hood is taken down, its wiring made safe and the bracket removed.
- Outlet and circuitPower where the new unit needs it, with any new circuit wired by a licensed electrician.
- Studs located and wall plate mountedWe find the framing and fasten the bracket to solid wood.
- Cabinet drilled to the templateHoles for the top bolts, the power cord and a top vent cut through the cabinet bottom.
- Unit hung and boltedThe unit is hooked on the bracket, bolted from above and checked for level.
- Testing and haul-awayHeating, exhaust and light tested, old appliance and boxes removed.
What to pick before the install
Over-the-range microwavesMicrowaves with a built-in exhaust fan and light that mount above the range.
Microwave drawersDrawer units set in a base cabinet, reachable without lifting dishes overhead.
Venting partsThe pieces that connect the microwave to the outside or set it up to recirculate.
Low-profile over-the-range modelsSlimmer microwaves for kitchens with limited space over the range.
Built-in and trim-kit microwavesMicrowaves set into a wall or pantry cabinet with a finishing trim.
What the work looks like in Bartlett homes
Before
Installed
DetailBartlett kitchen, 1990s two-story colonial: microwave installation
The site: a 1990s two-story colonial in Bartlett. What we started with: white appliances. The main complaint was an old hood and a countertop microwave eating prep space. The result: a new over-the-range microwave installed above the range and vented. The job covered old unit or hood removed, studs located and wall plate mounted, plus testing and haul-away.
Before
AfterBefore and after: a 1990s two-story colonial in Carol Stream
The site: a 1990s two-story colonial in Carol Stream. What we started with: almond appliances. What bothered the owners most: a decades-old hood and a microwave crowding the counter. Finished kitchen: a new over-the-range microwave installed above the range and vented. Work included studs located and wall plate mounted, unit hung and bolted, plus testing and haul-away.
Microwave Installation in Carol Stream →
Before
AfterBefore and after: a 1990s two-story colonial in Bloomingdale
The site: a 1990s two-story colonial near Old Town Bloomingdale. Before: black appliances. The reason for the call: an over-the-range unit that sagged off its bracket. Finished kitchen: a new over-the-range microwave installed above the range and vented. The job covered pre-install check, outlet and circuit, plus unit hung and bolted.
Microwave Installation in Bloomingdale →
Before
AfterBefore and after: a 1990s two-story colonial in Bartlett
What changed: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Bartlett →
Before
AfterA Bartlett 1990s two-story colonial: before and after
Finished: the same doors sprayed in creamy white uppers and navy lowers, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Bartlett →From the old unit to the new one
- Send the model and photosShare the model number and photos of the range wall, the cabinet above and the old unit.
- Fit and power checkClearances, power and duct are checked against the installation guide.
- Written estimateA clear written price with electrical or cabinet changes listed separately.
- Install and testOld unit down, new one mounted and vented, everything tested and the old microwave hauled off.
Microwave Installation questions from Bartlett homeowners
How much does microwave installation cost?
It depends on the type of microwave, whether a hood or old unit comes down, and any outlet, venting or cabinet changes. We give a written, itemized estimate after looking at your setup.
Do I need an electrician to install an over-the-range microwave?
Usually not for a straight swap. When a hood is being replaced or there's no receptacle overhead, electrical work is part of the job.
Can you install a microwave I bought at a big-box store or online?
Yes. We install microwaves from any retailer, whether or not they offered installation.
Will you take the old microwave or hood away?
Yes, along with all the packaging.
Can you put a microwave drawer in my island?
Usually, if there's a base cabinet of the right width and power can reach it. We cut the opening and add the outlet.
What does Bartlett ask for on electrical work?
Electrical work must be performed by a contractor registered with the Village as a licensed electrical contractor (stated in solar guide). New circuits and wiring are done by licensed electricians.
Do I need a Bartlett-registered contractor for microwave installation?
All contractors must be licensed by the Village of Bartlett (per trade); licensing questions via Main Office 630-837-0800. We take care of that before work starts.
Bartlett building permit for microwave installation: where do I apply?
Permits go through Building Division (Planning & Development Services), phone 630-540-5920. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for microwave installation in Bartlett?
It depends on the scope. Bartlett's rule in short: Building permits are required for all construction and home improvement projects, whether done by homeowner or contractor; Remodel is a listed permit type. We handle the permit when one is needed with Building Division (Planning & Development Services).
Do you work in my part of Bartlett?
Yes. Our crews work across Bartlett — ZIP 60103, 60120 — and nearby Hanover Park, Carol Stream, Bloomingdale.
Working in Bartlett
- A lot of Bartlett kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Bartlett homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Building Division (Planning & Development Services) handles kitchen permits and pull them for you.
ZIP 60103ZIP 60120
Microwave Installation nearby
Other kitchen services in Bartlett
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Oven, Range & Cooktop InstallationGas and electric ranges, wall ovens and cooktops, safely connected.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.